.

BBA steady state solar simulator tester

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

ISO 9060: Solar Energy – Classification of Pyranometers

CE Certification(Conformité Européenne)

Product Advantages

BBA-Grade Performance

Class B Spectral Matching: Ensures AM1.5G compliance for accurate energy rating.

Grade B Irradiance Uniformity: <5% deviation across 2.0m × 1.0m test area.

Multi-Mode Testing

STC/NOCT/Hotspot Simulation: Replicates standard test conditions, nominal operating cell temperature, and thermal runaway scenarios.

1.000 W/m² Tuneability: Adjustable irradiance for low-light performance mapping.

Stability First

Class A Transient Stability: <2% flicker during pulsed load testing.

Metal Halide Lamp Longevity: 5.000-hour lifespan with <10% lumen depreciation.

Smart Control

AI-Powered Irradiance Correction: Compensates for lamp aging in real-time.

Remote Calibration: Wi-Fi/Ethernet connectivity for ISO 17025 compliance.

Safety First

UV Filter: Blocks harmful UVC radiation during operator access.

Emergency Shutoff: Dual redundant safety circuits with GPS-enabled alerts.

Product Features

2.0m × 1.0m Test Area: Accommodates full-size 72-cell modules and small BIPV panels.

6-Axis Robotic Arm: Automates IV curve tracing and EL imaging positions.

10” Sunlight-Readable HMI: Preloaded IEC 61215/61646 test sequences with customizable dwell times.

Self-Cleaning System: Automated lamp housing purging for dust-free operation.

Modular Design: Expandable from 1 kW to 10 kW for pilot-scale production lines.

Accessories Included

Testing Kit:

4x PV module test fixtures (adjustable for frameless/framed modules).

10x Type T thermocouples with ceramic insulation.

Software Suite:

License key forSolarSim Pro(Windows/Linux).

1-year free access to cloud-based PV simulation tools.

Calibration & Safety:

NIST-traceable irradiance meter.

UV safety goggles (Class 1. 3 pairs).

Maintenance Kit:

Spare metal halide lamps and igniters.

Lamp cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

ParameterSpecification
Irradiance Range 200–1.200 W/m² (AM1.5G filtered)
Spectral Matching Class B (IEC 60904-9)
Uniformity Grade B (<5% deviation)
Stability Class A (<2% transient flicker)
Lamp Type Metal Halide (400 nm–1.100 nm output)
Test Area 2.000mm (W) × 1.000mm (D)
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 2.500mm (W) × 1.500mm (D) × 2.200mm (H)
Weight 1.800 kg (net) / 2.500 kg (gross)


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Thermal Insulation Material Smoldering Tester
Thermal Insulation Material Smoldering Tester Product Introduction: Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control sys...
Carpet Flammability Tester
Carpet Flammability Tester Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Temperature Tablet Test for Floor Coverings BS 6307: Fire Te...
Vacuum Blood Collection Tube Suction Volume meter
Vacuum Blood Collection Tube Suction Volume meter The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia...
Sharp edge tester
Sharp edge tester Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration: Sharp Edge Tester: 1 unit Foot switch: 1 set ...
Paper quantitative tester
Paper quantitative tester Product Introduction: The circular square quantitative sampler (referred to as quantitative sampler) is a special sampler for the quantitative det...
All supplier products

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Seller: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber Seller: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester Seller: Qinsun Instruments Co., LTD Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester Seller: Qinsun Instruments Co., LTD Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester Seller: Qinsun Instruments Co., LTD Product details Furniture flammability tester is mainly used to test the combustion performance ...