Appliance Stability Tester

Standards

GB4706.1.GB/T 21547-2008.EN 60335

Product Advantages

Fully conforms to critical international and national safety standards (GB 4706.1 and IEC 60335-1. Article 20.1).

Specifically designed for assessing the mechanical stability of a wide range of home appliances.

Features an adjustable angle device to simulate various tilt conditions as required by standards (typically 10° or 15°, and up to 30° or more for some models).

Provides a stable workbench for safely positioning test samples during testing.

Suitable for both large and small appliances that operate on a flat surface.

Enables objective evaluation of appliance safety and structural integrity.

Product Features

Workbench: A flat surface where the home appliance under test is placed.

Angle Adjustment Device: A mechanism that allows the workbench to be tilted to precise angles relative to the horizontal plane. This is typically adjustable to common test angles like 10° or 15°, as well as potentially higher angles up to 30° or 45°.

Rotary Base/Table: (Implied by "Rotary diameter") Allows for positioning the appliance in the most unfavorable orientation on the inclined plane.

Robust Construction: Designed to safely support the weight of various home appliances during testing.

Technical parameters

Work Surface: Consists of a work surface and angle adjustment mechanism, suitable for stability testing of appliances and other equipment that require a surface for operation.

Load Capacity: Typically ≤100 kg, suitable for large appliances.

Rotation: Rotatable, with adjustable speed.

Angle Range: Typically adjustable from 0° to 15°, with an accuracy of ±0.5°.

Vibration Simulation System: With a frequency range of 5 to 200 Hz, it can simulate vibrations during transportation or use.

Force Sensor and Displacement Measurement: Detects critical tipping angles or displacements, and records data in real time.

Safety Guards: Includes an emergency stop button and anti-tipping brackets to protect valuable samples.