Adiabatic Self - Accelerating Decomposition Temperature Tester
Product Introduction
This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H.2: Insulated Storage Test.
Standards
GB21613-2008
GB/T 39093-2020
Product Features
1. It adopts an embedded processor and the Windows CE operating system. 2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time. 3. It has a built - in air circulation system to ensure the uniformity and stability of the cabinet temperature. 4. The digital PID algorithm precisely controls the heating temperature with high temperature - control accuracy. 5. It is equipped with a cooling device to prevent the sample from overheating and exploding. 6. The auxiliary safety device can automatically cut off the heating system at a preset temperature. 7. The instrument has a fault - detection function and audible and visual alarm functions to ensure the safety of the test. 8. The front of the equipment is equipped with an explosion - proof glass observation window, and the back has a pressure - relief door design. When the internal thrust is greater than 2.5 kilograms of force, the pressure - relief door will open to ensure the safety of the test. 9. It can display the running time and real - time temperature in real - time, automatically draw test curves, and allow viewing of original data. 10. The test options are diversified, and users can configure corresponding test parameters according to the characteristics of the samples. 11. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical parameters
|
Operating environment |
(5～40)℃, <85%RH |
|
Chamber temperature control range |
-20°C to 220°C |
|
Temperature control accuracy |
±0.5°C |
|
Sample temperature measurement range |
(-50 to 500)°C |
|
Sample temperature measurement resolution |
0.1°C |
|
Sample temperature measurement accuracy |
±2.5°C up to 300°C; ±(0.75% of reading) above 300°C |
|
Dewar's bottle capacity |
1L |
Send product request
Other supplier products
 |
Bone Plates Four-point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million cycl... |
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact... |
 |
Carpet Combustibility Analyzer | Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Temperature Tablet Test for Floor Coverings BS 6307: Fire Te... |
 |
Solid electrolyte analysis system | Standard ISO 9001:2015(Quality Management System) ASTM E1970-21(Standard Guide for Electrochemical Impedance Spectroscopy) IEC 62660-2(Seconda... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
