Building Material Smoke Toxicity Tester
Introduction：
Building Material Smoke Toxicity Test Equipment plays a critical role in assessing the safety of construction materials. In the event of a fire, smoke and the toxic gases it carries pose a significant threat to human life. Smoke can cause disorientation, incapacitation, and even death due to the inhalation of harmful substances. The purpose of smoke toxicity testing is to predict and confirm the lethal toxic potency of smoke produced when materials are exposed to specific fire conditions, aiding in fire hazard analysis.
Technical parameters:
The ring furnace is heated, and the sliding module drives the ring furnace to move automatically to meet the quartz tube heating requirements.
The operating temperature can reach 1000° C, accurate temperature control, the temperature error is less than 1°C, the movement speed :10MM/MIN, the moving distance 750MM;
Equipped with high temperature resistant thermocouples for ring furnace temperature measurement and ring furnace combustion
The calibration of heat is equipped with a high-temperature quartz boat, and the sample is stored in a quartz tube to be heated and decomposed:
Thermocouple: Outer diameter 1.5MM high temperature resistance 0-1000 degrees;
Equipped with rotor flow meter for carrier gas and dilution gas supply, equipped with convenient control of high-precision valve body for gas switching;
Acrylic poison box, you can watch the movement of mice inside the window.
Send product request
Other supplier products
 |
Fire retardant coatings tester tunnel method | Product Introduction: The fire retardant coating flame propagation tester is suitable for testing the flame propagation characteristics of the fir... |
 |
Initial drying resistance tester | Introduction： The Initial Drying Resistance Test Machine is a crucial instrument in the evaluation of architectural coatings and building putties,... |
 |
Building material products single combustion tester | Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C... |
 |
Fire retardant coating tester | Product Introduction: The tester conforms to the technical indicators and requirements specified in the national standard GB12441-2005. and is sui... |
 |
Building Materials Combustibility Test Chamber | Building materialsfire resistance testis a very importantandprofessionaltestin safety engineering. The national standard, GB/T8626-2007. specifies ... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
