Absorbing Material EMI Absorber Sheet With Tape
Among those famous absorbing material emi absorber sheet with tape manufacturers, it is a professional supplier in China, welcome to wholesale absorbing material emi absorber sheet with tape from our factory.Unlike shielding material, EMI Absorber tape are electrically non-conductive and safe to be applied on a PCB without short-circuiting. It can blanket the noise source to attenuate the EMI RF emission or to protect the sensitive IC's from other noise source to ensure their proper performance. While shielding material tries to confine the EMI noise from leaving the enclosure to satisfy FCC regulations, the EMI RF, confined within the enclosure (standing wave), will sometimes affect the performance of other critical IC circuitry. EMI absorbers attenuate the RF by changing it into heat energy which dissipates in an instant. With EMI absorbers, magnetic metal particles are suspended in an elastomeric, such as epoxy or silicone, sometimes in a strategic array. Some are designed to be wide-range frequency absorbers, high frequency absorbers, or low frequency absorbers to suit the need. Combination of type of magnetic metal particles, their size, density, and thickness of the absorber can determine the effectiveness and frequency range. Some are designed to be most effective at a specific frequency. NS SERIES EMI Absorber Tape Ns series EMI absorber tape consists of a flexible rubber filled with soft magnetic metal powders. It can suppress noise radiated from electronic devices across a wide frequency range. An acrylic pressure-sensitive adhesive allows for easy application. The flexible sheet can be easily cut into complex shapes.Product typeNS30NS45MaterialsAlloy powders + PolymerApplication frequency range (GHz) 0.1~6.0Thickness(mm) 0.1~1.0Standard packaging (mm) 200×300 per Roll or Sheet Density (g/cm^3）3.13.2Initial Permeability (@1MHz) 3045Attenuation (dB)Reflection Loss and Transmission loss, Refer to the GraphTemperature range （℃〉-40 to 100Surface resistivity <Ω>1000000EnvironmentRoHS ComplianceHalogen Free& PVC-FreeNotes: 1. The data is for absorber layer only, the typical thickness of adhesive tape is about 0.03~0.05mm, can be adjusted according to request. Permeability of NS SERIES EMI Absorber Tape: Attenuation
Other supplier products
|
|
Small Strong Micro Tiny Magnets For Quartz Watch |
Among those famous small strong micro tiny magnets for quartz watch manufacturers, it is a professional supplier in China, welcome to wholesale sma... |
|
|
Permanent Sintered Alnico Magnets for Odometer of Automobile |
Among those famous sintered alnico magnets manufacturers, it is a professional supplier in China, welcome to wholesale alnico pickup magnets, alnic... |
|
|
N52 Neodymium Magnet Super Magnet Ndfeb Ring Magnet |
Among those famous n52 neodymium magnet super magnet ndfeb ring magnet manufacturers, it is a professional supplier in China, welcome to wholesale ... |
|
|
Fridge Magnets |
Fridge Magnets / Promotional Magnets Bonded magnet materials can be created through Injection Molded and can be made from Strontium Ferrite ,Websit... |
|
|
Injection Magnet Plastic Magnet What Is Injection Moulding |
Among those famous injection magnet plastic magnet what is injection moulding manufacturers, it is a professional supplier in China, welcome to who... |
All supplier products
Same products
