70/30 Copper Nickel wire mesh
70/30 Copper Nickel Alloy
Chemical composition (%)
Alloy Name Copper Nickel Iron Lead
70-30 copper nickel C71500 ~ 69 29.0 – 33.0 0.4 – 1.0 < 0.05
Mechanical Properties:
Tensile strength ( M/Pa ) 20℃ ≥360
Yield strength 0.2% (MPa)20℃ ≥125
Characteristics:
1. Moderate strength, workability, formability and weldability；
2. Excellent resistance to bio-fouling and corrosion in sea-water
3. High resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement
Applications:
1. Condensers
2. Seawater piping
3. Power plants
4. Exchanger shells
Specification:
Wire JIS C2521
ANSI/ASTM B164 Diameter:0.05mm-10.0mm,
0.002 Inch to 0.3937 Inch
Wire Mesh GB/T 5330.1
GB/T 17492
JB/T 9155 0.5-250 mesh/Inch
Thickness: Min0.05mm
Sheet JIS C2521 Thickness: 0.05mm and above
Other supplier products
|
|
Incoloy 800/800H/800HT wire mesh |
Incoloy 800/800H/800HT
Chemical Composition(%):
Ni Fe Cr Cu Ti Al C Mn S Si
Alloy 800 30.0-35.0 39.5 19.0
-23.0 0.75max 0.15-0.60 0.15
-0.60 ... |
|
|
Monel K-500 wire mesh |
Monel K-500
Chemical composition (%):
Ni Cu Al Ti C Mn Fe S Si
63.0-70.0 Remainder 2.30-3.15 .35-.85 .25 max 1.5 max 2.0 max .01 max .50 max
Ph... |
|
|
Inconel 600 wire mesh |
Inconel 600
Chemical Composition:
% Ni Cr Fe C Mn Si Cu P S
Min. 72 14 6
Max. 17 10 0.15 1 0.5 0.5 0.015 0.015
Physical and Mechanical Proper... |
|
|
Cr20Ni80 wire mesh |
Cr20Ni80
Chemical Composition:
Nickel% Chromium% Iron% Silicon% Manganese
Bal 20 1 max 1-1.50 1 max
Physical and Mechanical Properties:
Meltin... |
|
|
Monel 400 wire mesh |
Monel 400
Chemical composition (%):
C Mn S Si Ni Cu Fe
0.30 max 2.00 max 0.024 max 0.50 max 63.0 min 28.0-34.0 2.50 max
Physical and Mechanical... |
All supplier products
Same products
