Chromium carbide powder with strong resistance to abrasive wear
The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder produced by the carbothermal reduction method has a finer particle size and a lower cost, making it suitable for large-scale application. When the oxygen content of the powder is less than 0.2%, it can reduce the pores and inclusions in the coating and improve the density of the coating. After spraying chromium carbide powder on the surface of the valve tappets of a car engine, the wear of the tappets can be reduced by 80%, and the major overhaul cycle of the engine can be prolonged.
Send product request
Other supplier products
 |
Wear-resistant titanium carbide hard alloy guide wheel | The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to ... |
 |
Wholesale Chromium Carbide Powder | The powder has good chemical stability, does not react with water and dilute acid at room temperature, and only dissolves slowly in concentrated ... |
 |
Titanium carbide hard rods - suitable for chemical parts | The anti-adhesion performance of titanium carbide round rods fabricated from cemented carbide is exceptional. When machining sticky materials such ... |
 |
Chromium carbide powder for stable operation at 800℃ | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
 |
Titanium carbide guide wheel - for industrial use | Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurg... |
