Spray uniform titanium carbide powder without pores
Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground. The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements of different forming processes. Spherical powder has good fluidity and is suitable for laser 3D printing. The density of the printed parts can reach 99.8%, and its mechanical properties are comparable to those of traditional sintered parts. The bulk density of powder can be adjusted by particle size. Fine powder has a low bulk density and is suitable for pressing complex-shaped parts. Coarse powder has a high bulk density and is suitable for forming large-sized green bodies. In the field of personalized medical implants, 3D-printed titanium carbide parts are well compatible with human bones, and they are of high strength and light weight
Send product request
Other supplier products
 |
Titanium carbide guide wheels with no scratch contamination on the surface | 硬质合金碳化钛导轮具有优异的抗冲击性能。当丝突然受力或断裂时，它们不易裂纹或变形，从而降低设备停机的风险。它具有优异的热传导性能，可以迅速散发摩擦产生的热量，使导轮的工作温度保持在80℃以内，防止丝因过热而退火。在弹簧钢丝的生产中，使用这种导轮可以将钢丝的直线度误差控制在0.5mm/m以内，从... |
 |
Titanium carbide alloy rods are suitable for metal stamping | Compared with traditional high-speed steel, hard alloy titanium carbide round bars enable a 3 to 5 times increase in cutting speed, significantly r... |
 |
Coating raw material for wear resistance and corrosion resistance | The preparation methods of this powder mainly include the electric arc furnace method and the carbon thermal reduction method. Among them, the powd... |
 |
Fiber Optic Cutting Knife Round Rod | Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phas... |
 |
Industrial grade titanium carbide guide wheel | The hard alloy titanium carbide guide wheels exhibit a broad operating temperature range, maintaining stable performance in environments from -100&... |
Same products
 |
3D printing spherical titanium carbide powder | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
