Highly fluid titanium carbide powder
Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground. Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components. Coating it on the surface of steam turbine blades can resist the erosion and oxidation of high-temperature gas, thereby extending the service life of the blades. The powder has a high grinding efficiency and can be used to make abrasives. When grinding hard alloys, its efficiency is twice that of alumina abrasives. In the processing of optical glass, the grinding tools made of this powder can ensure the high smoothness of the glass surface.
Send product request
Other supplier products
 |
Titanium carbide powder with enhanced wear resistance | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
 |
Titanium carbide rods with fully customizable specifications | Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, whic... |
 |
Titanium carbide powder with a sintered density of 99.8% | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
 |
Wholesale round bars from stock | Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ... |
 |
High wear-resistant carbide titanium alloy guide wheel | The guide wheel is equipped with precisely machined installation holes, which can strictly control the fit clearance with the shaft within 0.005- 0... |
Same products
 |
3D printing spherical titanium carbide powder | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
