Titanium carbide hard rods - suitable for chemical parts
The anti-adhesion performance of titanium carbide round rods fabricated from cemented carbide is exceptional. When machining sticky materials such as aluminum and copper alloys, these rods exhibit a significantly reduced tendency for built-up edge formation, thereby ensuring a smooth machined surface. Their surface properties can be further enhanced through coating technologies—such as TiAlN coatings—which improve wear resistance and oxidation resistance, extending tool life by over 50%. In the medical device industry, they are commonly used in the manufacture of orthopedic surgical instruments, offering not only excellent cutting sharpness but also the ability to withstand repeated high-temperature sterilization without deformation. The length of the round rod can be customized within a range of 100 mm to 1000 mm and is amenable to secondary precision processes such as grinding and wire electrical discharge machining, enabling the production of components with complex geometries. Although the initial cost is higher than that of conventional cemented carbide, the overall cost per unit product is lower when accounting for extended service life and improved processing efficiency. In gear manufacturing, hobs produced from this material ensure gear tooth profile accuracy at ISO quality grade 6 or higher, meeting the stringent requirements of high-performance mechanical transmission systems.
Send product request
Other supplier products
 |
Titanium carbide powder that meets international standards | Titanium carbide powder is a grayish-black ultrafine powder with a purity of over 99.9%, and an average particle size ranging from 0.5 to 5μm. I... |
 |
Titanium carbide guide wheels with no scratch contamination on the surface | 硬质合金碳化钛导轮具有优异的抗冲击性能。当丝突然受力或断裂时，它们不易裂纹或变形，从而降低设备停机的风险。它具有优异的热传导性能，可以迅速散发摩擦产生的热量，使导轮的工作温度保持在80℃以内，防止丝因过热而退火。在弹簧钢丝的生产中，使用这种导轮可以将钢丝的直线度误差控制在0.5mm/m以内，从... |
 |
Metal wire mesh produces titanium carbide hard alloy guide wheels | The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to ... |
 |
Nano grade titanium carbide alloy round bar | 该圆棒的生产工艺极其严谨，从碳化钛粉末纯度的控制（纯度≥99.5%）到烧结温度的精确调控（约1500℃），每一个环节都影响着最终的性能。成品尺寸稳定性极佳，在-50℃至300℃的温度变化下，热膨胀系数仅为6×10-⁶/℃，远低于金属材料，确保了精密工具在不同环境下的精度。它广... |
 |
Chromium carbide powder with enhanced wear resistance and heat resistance | Chromium carbide powder is a grayish-black powder with a melting point of approximately 1890℃ and a Mohs hardness of 8.5. It features excellent wea... |
