Titanium carbide rods for metal forming
Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, which can significantly shorten the processing time in mass production. Its microstructure is uniform, and the grain size can be controlled below 1μm, ensuring consistent performance in all parts of the bar and avoiding tool failure caused by uneven material. In the mold industry, the cold stamping die inserts made from it have a service life 50 to 100 times that of steel inserts, which can significantly reduce the replacement frequency and production costs. The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum alloy and copper alloy, the phenomenon of "tool sticking" is less likely to occur, ensuring a smooth processing surface. Its surface can be further enhanced in terms of wear resistance and oxidation resistance through coating treatment (such as TiAlN coating), increasing the tool life by more than 50%. In the field of medical devices, it is often used to make orthopedic surgical instruments, which not only ensure sharpness but also can withstand high-temperature disinfection without deformation.
Send product request
Other supplier products
 |
High-speed wire carbon titanium carbide hard alloy guide wheel | This guide wheel exhibits exceptional corrosion resistance, remaining rust-free for over five years in humid environments containing chloride ion... |
 |
Wholesale round bars from stock | Titanium carbide cermet rods (TiC rods) belong to the group of steel-jointed cemented carbides, which are composites of steel as the bonding phase ... |
 |
Stable quality titanium carbide powder | The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements... |
 |
800°C stabilized carbide rods | Tungsten carbide titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard p... |
 |
Chromium carbide powder for sintering | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
