carbon fiber fabric
Carbon fiber fabric
It is made of carbon fiber by woven unidirectional, plain weaving or twill weaving style. The carbon fiber is high strength-to-weight and stiffness-to-weight ratios, and carbon fabric is thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fabric composites can achieve the strength and stiffness of metals at significant weight savings. Carbon fabrics are compatible with various resin systems including epoxy, polyester and vinyl ester resins. It is widely used as the basic material for aerospace, defence, leisure, automotive products, industry and the medical sector as well as other applications includes building construction repair and strengthening.
General Data
Weaving Style: Unidirectional, Plain, Twill
Input Available: 3k, 6k, 12k Carbon fiber
Weight: 15 0 ~ 600g / m2
Roll length: To be specified
Remark :
- The above parameters are only in common condition. In case of order, the parameters are subject to the customer's confirmation.
- CWP: Carbon plain weave fabric
- CWT: Carbon twill weave fabric
- CWU: Carbon woven unidirectional fabric
Packaging
Product is manufactured in form of a roll wound on a paper tube and then packed in a plastic film and placed within a cardboard carton. Rolls can be loaded into a container directly or on pallets.
Storage
It is recommended that the carbon fiber fabric are stored in a cool and dry environment. Recommended temperature range of storage is between 10 ~ 30 degree and relative humidity between 50 ~ 75%.
The carbon fiber fabric should remain in the packaging until just prior to use.
Typical Range
Product Code |
Density (g/m2) |
Input Tex |
Fabric Count (ends/10cm ) |
Tensile Strength(Mpa) |
Tensile Modulus(Gpa) |
||
Warp |
Weft |
Warp |
Weft |
||||
CWP200 |
200 |
3k |
3k |
50 |
50 |
||
CWT200 |
200 |
3k |
3k |
50 |
50 |
||
CWU200 |
200 |
12k |
≥ 3500 |
≥230 |
|||
CWU300 |
300 |
12k |
≥3500 |
≥230 |
Send product request
Other supplier products
Sanding mesh | Sanding mesh It is cut by puncher from reinforcing net fiberglass cloth for grinding wheel. The cloth was coated with phenolic resin epoxy resin, t... | |
Carbon fiber chopped strand/ chopping carbon/ carbon fiber | Carbon fiber chopped strand/ chopping carbon/ carbon fiber It is 1-80mm, cutting from carbon fiber yarn. It is base material of function material m... | |
High strength S-glass fiber fabric | High strength S-glass fiber fabric It is made of pretreatment process, without high temperature dewaxing, it could used with epoxy, vinyl resin. It... | |
E-glass chopped strand | E-glass chopped strand 1. feature and usage e-glass chopped strand is short cut from continuous e-glass fiber. It could be used for the reinforceme... | |
Low dielectric loss glass fibe | Low dielectric loss glass fiber Low dielectric names D glass fiber, have D3, Dk series. It is low density, low dielectric constant and low dielectr... |
Same products
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL | Seller: Xiamen Talent Carbide Co.,Ltd | 4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL ... | |
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUM | Seller: Xiamen Talent Carbide Co.,Ltd | 3 FLUTE, 16MM CARBIDE END MILL, MILL CUTTER FOR ALUMINUM Grain size Cut... | |
2 FLUTE, 5MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | Seller: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 5MM END MILL, SMALL DIAMETER CARBIDEMILLINGCUTTERS Grain size ... | |
2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTER | Seller: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 18MM END MILL, MILL CUTTER Grain size Cutting dia. 18... | |
2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTER | Seller: Xiamen Talent Carbide Co.,Ltd | 2 FLUTE, 0.8 MMENDMILL, SMALL DIAMETER MILL CUTTER Grain size Cutti... |