Steel Bloom
Description of Steel Bloom
Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the billet. The cross-section of the slab bloom is usually greater than 225 square centimeters and about 8 to 12 meters long. In the rolling mill, it is broken down into finished products such as bars, beams and sheet piles. In earlier mills, ingots were made from cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting.
Production Procedure of Steel Bloom
The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated to about 1,250°C (2,300°F). The soaking pit is highly computerized and can be used for scheduling, firing rate, heating time (lasting 8 to 18 hours) and rolling programs.
After heating, the conveyor carries the hot ingot to a two-high reversing mill, which passes, again and again, turning the roll and roll table over each time the ingot passes. Since each pass reduces the bloom by only about 50mm, 21 passes may be required, including several edges pass, and the bloom stands upright on its edge to obtain a slab bloom billet of 150mm*150mm.
Huaro Steel is a professional tinplate steel sheets suppliers,.The main products HUARO provides are hot rolled steel, cold rolled product, tin-plated product, galvanized product, pre-painted product which are directly exported to Middle East, Europe and Southeast Asia.
Send product request
Other supplier products
 |
Tinplate Coil | Description of Tinplate Coil Tinplate is made from the cold-rolled sheet which is electroplated with tin. Tin coatings'function is corrosion resist... |
 |
Hot Briquetted Iron (HBI Iron) | Definition of HBI Hot Briquetted Iron (HBI) is a premium form of Direct Reduced Iron (DRI).As a supplement for pig iron and scrap in electric furna... |
 |
Steel Bloom | Description of steelbloom Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the bille... |
 |
Tinplate Coil | Description of tinplate steel coil Tinplate is made from the cold-rolled sheet which is electroplated with tin. Tin coatings'function is corrosion ... |
 |
Cold Rolled Steel | Cold rolled steel is the steel produced by cold rolling. Cold rolling is to further thin the steel plate to the target thickness at room temperatur... |
Same products
 |
COLOR-COATED PLATE | Seller: Nearyz Resources Limited | Color-coated plate, also known as color steel plate, color plate in the industry.The color-coated... |
 |
REINFORCING BAR (RE BAR) | Seller: Nearyz Resources Limited | (RE Bar)is a common name for. Rebar (short for reinforcing bar), known when massed as reinforcing... |
 |
Cold Heading Quality (CHQ) Wires | Seller: Nearyz Resources Limited | Cold Heading Quality (CHQ) Wiresis a kind of steel wire that is manufactured by drawing and annea... |
 |
CK800 Flat Bed Lathe | Seller: Taizhou Eastern CNC Technology Co., Ltd. | The CK800 Flat Bed Lathe carriage in the machine tool adopts a double tool holder design, which i... |
 |
stainless steel filter elements | Seller: ZHUAN LV FILTRATION | stainless steel filter elements Stainless Steel Filter Cartridges/Elements Stainless Stee... |
