SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber
The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It is widely used in industrial floors, mortar reinforcement, shotcrete, tunnel and etc.
The Specification of SDS-05530 0.55mm Diameter 30mm Length Glued Hooked End Steel Fiber
|
Name |
SD-05530 |
|
Type |
Glued |
|
Diameter |
|
|
Length |
30mm |
|
L/D(length/diameter) |
55 |
|
Tensile strength |
>1150Mpa |
|
Application |
shotcrete |
The Advantages of SDS-05530 0.55mm Diameter 30mm Length Glued Hooked End Steel Fiber
With good dispersion in concrete;
High toughness and lower thickness;
Integrated, no pores, more efficient;
Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.
USER'S GUIDANCE
Dosage: This depends on the application and the minimum dosage is 20kg/㎥-70kg/㎥
Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it on a mixing table, dry, and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.
Put the uniformly mixed fiber concrete into the conveyor and transport.
Concrete pouring and laying should be compacted.
The Safety & Packaging of SDS-05530 0.55mm Diameter 30mm Length Hooked End Steel Fiber
Star Smith is a professional steel fiber manufacturerthat can offer a wide range of hooked end steel fiber that meets different needs.
Packaging:20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20’container.
And the pallets should be waterproof, don’t stack pallets on top of each other.
Gloves and eye protection should be used when adding the steel fibers.
For more informationabout steel fibre rate per kg, please feel free to contact us!
Send product request
Other supplier products
 |
SDS Micro Copper Coated Steel Fiber | Micro steel fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high ... |
 |
SDS-1823 0.18-0.23mm Diameter 13±1mm Length Copper Micro Steel Fiber | Micro steel fiberare made of copper-coated steel wire. Micro steel fiber wireis one of most important material of RPC and UHPC. UHPC has high st... |
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, sh... |
 |
SDS Micro Copper Coated Steel Fiber | Micro brass fibers are made of copper coated steel wire , which is the most important materials of RPC and UHPC. UHPC has the features of very high... |
 |
Steel Fibers For Durability | Steel Fibers For Durability The tensile strength of SDSsteel fiberreinforced is more than 1150MPa, and it will not be broken when concrete is subj... |
Same products
 |
Cleaning Agent | Seller: Foshan Jiwei New Material Co.,Ltd | Cleaning Agent PUR cleaning agentis a specialized solution designed for effectively removing pol... |
 |
3D Laminating Water-Based Polyurethane Adhesive | Seller: Foshan Jiwei New Material Co.,Ltd | 3D Laminating Water-Based Polyurethane Adhesive 3D laminating water-based polyurethane adhesivei... |
 |
Liquild PUR Adhesive | Seller: Foshan Jiwei New Material Co.,Ltd | Liquild PUR Adhesive PUR adhesive, also known as polyurethane reactive adhesive or polyurethane ... |
 |
PUR for Edge Banding | Seller: Foshan Jiwei New Material Co.,Ltd | PUR for Edge Banding Edge banding adhesiveis a type of glue used in furniture manufacturing and ... |
 |
PUR for Flat Lamination | Seller: Foshan Jiwei New Material Co.,Ltd | PUR for Flat Lamination Our PUR (Polyurethane Reactive) adhesive is specially formulated for fla... |
