Low Temperature Bending Tester
Standards ASTM D1790: Brittleness temperature testing for plastic sheeting under impact. ASTM D1593M: Low-temperature flexibility of coated fabrics. JIS K6545: Flexing endurance assessment for leather and synthetic materials in cold climates. Product Advantages Extreme Temperature Performance: Tests materials from ambient to -60°C, simulating Arctic or high-altitude conditions. Dual Fixture Options: 6-station (1.5Hz) or 12-station (100 cycles/min) configurations for versatile testing protocols. Precision Cooling: R404A refrigerant and France Taikang compressors achieve -60°C in 60 minutes with ±0.5°C accuracy. Enhanced Safety: Thermal shutdown, overload protection, and vacuum-insulated windows ensure operator safety. Modular Design: Interchangeable V-shaped fixtures (40° angle, 6.4mm radius) accommodate footwear uppers, gloves, and textiles. Energy Efficiency: 4kW power consumption with hard foam/glass wool insulation minimizes operational costs. Product Features Stainless Steel Construction: Corrosion-resistant 304-grade steel chamber with dual-layer vacuum windows. Omron Controller: Programmable temperature ramps, cycle counts, and hold times with LCD data display. Rapid Cooling System: -30°C achieved in 45 minutes; -60°C in 60 minutes via cascading refrigeration. Safety Suite: Leakage protection, over-temperature alerts, and 5-minute compressor delay for longevity. Illuminated Chamber: 5W LED lighting for clear sample observation during testing. Multi-Station Flexing: 12 clamps with 22.5° bending angle or 6 clamps with 40° V-shaped fixtures. Technical Parameters Parameter Specification Temperature Range Ambient to -60°C (dual models) Control Accuracy ±0.5°C Uniformity ±2°C across chamber Cooling Rate -30°C in 45 min / -60°C in 60 min Fixture Options 6 or 12 stations (V-shaped/flat) Flexing Frequency 1.5Hz or 100 cycles/min Power Supply AC380V, 50Hz, 4kW Chamber Dimensions 60 × 60 × 55 cm (W × D × H) Footprint 110 × 105 × 160 cm (W × D × H) Net Weight 420 kg Safety Certifications CE, ISO 12100, RoHS-compliant
Other supplier products
|
|
2800 bar Pump Units |
For concrete removal, heat exchanger cleaning, road marking removal,aireport runway marking removal,pipleline repair, high pressure cutting and pre... |
|
|
Cleaning lance for tank cleaning nozzles |
Cleaning lance for tank cleaning nozzle
Material: 304SS, 316SS, Teflon on request
Size: customizable
Length: customizable
Connection: flange, t... |
|
|
Computer controlled horizontal tensile testing machine |
Product Introduction:
The microcomputer controlled horizontal tensile testing machine （hereinafter referred to as the testing machine） is mainly u... |
|
|
Barrel handling equipment |
Barrel Clamps
ModelDescriptionRated Load
DTC
Dual-Barrel Clamp
720 kg
STC
Single-Barrel Clamp
360 kg
STD12 Transfer... |
|
|
Wyzenbeek or Oscillatory Abrasion Tester-QINSUN |
Product introduction:
Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
All supplier products
Same products
