Automatic tank cleaning systems
Automatic tank cleaning systems,fermentation tank cleaning equipment
Automatic tank cleaning system common application:
Fermentation Tank Cleaning equipment is mainly used for thorough cleaning of cubic tank, such as medium-sized, large-sized fermentation tanks, mixing tank ,reactor, etc
Working Principle
The equipment system adopts the mobile trolley as the carrier, the control system and the power system are integrated, and point with cleaning port position , enter the automatic cleaning program, the servo drive wheel and the lifting system, the telescopic system and the tilting arm system are synchronized.
The washing machine drives the hose to automatically expand and contract, and the positioning can be stopped and cleaned at any position in the tank. The cleaning time can also be arbitrarily on the touch screen. After setting, after completely cleaning, each system will automatically return to the original position in order to move and clean the next tank.
Automatic tank cleaning system design features:
● Small and flexible, easy to operate , one person can realize multi-machines operation
● no need to enter the tank, automatic cleaning
● no water splashing outside the tank
● no need to make any changes to the tank
● Low consumption of cleaning fluid, short cleaning cycle time
Technical information:
1. This system can be used for tanks to diameter 2-15m
2. Rated flow rate 10-12m3/hr, rated head 100 meters (pressure 10-15 bar)
3. The cleaning cycle is short and can be set freely according to the cleaning conditions (5-20 minutes)
4. The height position of the washer can be set freely
5. It can realize the cleaning of different points on both sides of the stirring shaft to avoid cleaning dead angles. It does not need to add extra parts such as rails inside the reactor, saving cost and avoiding additional cleaning dead spots.
6. High-impact three-dimensional rotating tank washer, with large impact force and long range, driven by water pressure, realizes rotation and revolution 360° , thorough clean
7. The tank washer adopts advanced planetary gear reducer, which is balanced in power, no shaking and swinging during the cleaning process, avoiding impact on internal equipment and damage to the tank washer.
Send product request
Other supplier products
 |
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester | Applicable standards: GJB773B and other standards in the annex G dynamic cutting test requirements Applicable industry: This instrument is the... |
 |
Wyzenbeek or Oscillatory Abrasion Tester-QINSUN | Product introduction: Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
 |
SO2 H2S HCL Corrosion Test Equipment | Meeting Standards: Carry out various sulfur dioxide gas corrosion tests in accordance with GB10587 - 89. GB2423.9 - 93. GJB150. QC/T417.1 - 2001 a... |
 |
JIS Colour Fastness Rubbing Tester (Gakushin)-QINSUN | Product Overview TheJapanese Standard Color Fastness to Rub Tester (Gakushin)is a specialized instrument designed to evaluate the colorfastness of... |
 |
Scratch-resistance testing machine | Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface ... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
