SDS Steel Fiber
Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three steel fiber manufacturerspecializing in steel fiber production in China and has participated in the construction of national projects several times. Established in 2011, we can provide an annual production scale of up to 10,000 tons of steel fiber for concrete. It mainly produces glued steel fiber, copper-coated micro steel fiber and loose steel fibers.
The steel fibre typesfor concrete reinforcement is a new kind of metal material, in order to enhance concrete and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength and shear strength, and have good toughness, crack resistance, earthquake resistance, seepage control and other functions. Widely used in industrial factory floor, highway, high-speed rail, bridge, airport, tunnel, water conservancy, electric power, municipal engineering, etc. The company has passed ISO9001 certification, and its products are exported to Southeast Asia, Europe, America and etc.
The Benefits of hooked end steel fiber
For the same mixing and construction, there is no need to add equipment or increase the construction cost.
Under the same strength requirement, it can replace steel mesh and reduce the pouring thickness of concrete by 15-25%.
Improve the construction conditions, mixing vehicles and construction personnel can reach the site directly, and shorten the construction period by 30%. Steel fiber reinforced concrete has high tensile strength, which can prolong the distance between contraction joints and facilitate continuous and rapid pouring of concrete.
Convenient construction, saving labor, greatly shortening the construction period and saving the total project cost.
The Working Principle of hooked end steel fibres
Fibers reinforce in three dimensions throughout the entire concrete matrix. Fiber performance is based on the combination of the tensile strength, aspect ratio(length/diameter) and anchorage. The distributed fibers restrain micro-cracking and redistribute accumulated stress caused by applied loads and shrinkage. The sooner the crack is intercepted and its growth is inhibited, the less chance the crack will occur.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Steel Fiber For Expressway Pavement | Steel Fiber For Expressway Pavement In highways, airports, and other pavement projects, cement concrete is used to build pavements, airport paveme... |
 |
Стальная фибра SDS Steel Fiber | There are many types of steel fibers used in concrete used in concrete. The shotcrete steel fibre for concrete reinforcement is a new kind of metal... |
 |
SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber | The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times cont... |
 |
Steel Fiber Solutions | Tengzhou Star smith Metal Products Co., Ltd. (SDS）is one of the top three enterprises specializing in steel fiber production in China and has parti... |
 |
SDS-07535 0.75mm Diameter 35mm Length Hooked End Steel Fiber | This fiber is a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute... |
Похожие товары
 |
Bottle Cap Mold | Продавец: Taizhou Qihong Mold Co., Ltd. | Bottle Cap Mold is designed for precise and consistent plastic cap production, supporting differe... |
 |
High quality beeswax used in craft production | Продавец: Syntop chemical Co.,Ltd. | Beeswax has a wide range of uses in handicrafts, appearing in everything from traditional candles... |
 |
FT wax used for EVA-based hot melt adhesive | Продавец: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... |
 |
high melting point FT wax improve the heat resistance of adhesives | Продавец: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... |
 |
For hot melt adhesive high melting point FT WAX | Продавец: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... |
