ABS Injection Molding

• 

Plastic ABS resin is the polymer with the largest output and the most extensive application. As one of the abs plastic molding manufacturers, Feman Tooling organically unifies the various properties of PB, PAN and PS, and has excellent mechanical properties of toughness, rigidity and rigid phase balance.

ABS has excellent comprehensive physical and mechanical properties, and good low temperature impact resistance. Dimensional stability. Good electrical properties, wear resistance, chemical resistance, dyeing, finished product processing and mechanical processing.

Two-color injection moldingrefers to the plastic injection mold and moldingof two different materials into the same set of molds, so as to realize the molding process of the injection molded parts formed by the two materials. Some two materials are different colors, and some are different in softness and hardness, so as to improve the aesthetics and assembly performance of the product.

Can abs plastic be injection molded

ABS plastic is high in strength, light in weight, large in surface hardness, very smooth, easy to clean, stable in size, good in creep resistance and suitable for electroplating. Its field of application is still expanding. ABS plastic is widely used in industry. ABS injection products are commonly used to make shells, boxes, parts, toys, etc. Extruded products are mostly plates, rods, pipes, etc., which can be hot pressed, compound processed and modeled.

Properties of ABS Injection Molding Resin

Good overall performance, high impact strength, chemical stability, good electrical performance.

Good fusion with 372 plexiglass, widely used in two-color plastic parts, and the surface can be chrome plated and painted.

There are high impact resistance, high heat resistance, flame retardant, reinforcement, transparency and other levels.

Liquidity is a little worse than HIPS, better than PMMA, PC, etc., and flexible.

It is suitable for making general mechanical parts, wear-reducing and wear-resistant parts, transmission parts and telecommunication parts.

ABS lnjection Molding Requirement

Drying Temperature 60-80 °C

Drying Time 2.0-3.0 hr

Suggested Moisture Content <=0.20 %

Rear Barrel Temperature 180-220 °C

Middle Barrel Temperature 190-230 °C

Front Barrel Temperature 210-240 °C

Nozzle Temperature 200-240 °C

Mold Temperature 40-80 °C

Другие товары поставщика

	Electronic Plastic Injection Molding	Feman is specialized in injection molding electronicsproducts plastic mold building. We got full experience in making industrial light, covering ho...
	POM Plastic Injection Molding	POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-crystalline engineering thermoplas...
	Electronic Plastic Injection Molding	Feman is specialized in electronics injection moldingof electronics products plastic mold building. We got full experience in making industrial lig...
	Acrylic Injection Molding	With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold an...
	Nylon Injection Molding	Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white,...

Похожие товары

	ETH Ethereum Jasminer X4 BRICK ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ...
	ETH Ethereum Jasminer X4-1U ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl...
	ETH Ethereum Jasminer X16 ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ...
	ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a...
	ETH Ethereum iPollo V1 Mini SE ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe...