AlNiCo Magnets
alnico magnets china
china alnico magnets
alnico magnets for sale
Category: alnico magnets China, China alnico magnets
Advantages: high magnetic energy, good temperature stability
Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized
AlNiCo magnet is the earliest developed permanent magnetic material, it is an alloy of Al, Ni, Co, Fe and another rare metal element. AlNiCo permanent magnets birthed in 30 years of 20 Century, its magnetic property is best in the years, so it was most widely used in permanent magnetic motors. But that application in motors was replaced step by step when ferrite permanent magnets and rare earth magnets produced. And the proportion of AlNiCo application for motors went down. For AlNiCo magnets, the ability of corrosion resistant is good, surface treatment is not needed for it. It usually made into cylinder AlNiCo magnets or block AlNiCo magnets. The advantages of AlNiCo magnets are high remanence (maximum up to 1.35T) and low-temperature coefficient(-0.02%/℃), maximum working temperature is around 520℃, the magnetic properties change caused by temperature change is very small. The disadvantages of AlNiCo are low coercivity (normally lower than 160KA/m), and the demagnetize curve is not linear, it is easy to be magnetized and also easy to be demagnetized.
According to the different production methods, it classified as sintered AlNiCo magnets and cast AlNiCo magnets. Cast AlNiCo can be machined into different shapes and sizes, for all kinds of permanent magnets, cast AlNiCo magnets have the lowest Temp.Coefficient, its working temperature can be up to 600 degrees. Cast AlNiCo magnets are used for kinds of instruments and meters, auto parts,electric-acoustic, teaching field etc.
Compared with cast AlNiCo magnets, sintered AlNiCo magnets suit for making complex shapes and smaller sizes,the size tolerance for sintered AlNiCo magnets is smaller and better than cast AlNiCo magnets. For sintered AlNiCo magnets, the process is simple and it can be pressed into needed size directly.The property of sintered AlNiCo magnets is lower than cast AlNiCo magnets, but sintered AlNiCo magnets more suitable for machine.Sintered AlNiCo magnets are wide used on instruments and meters, comm unicate,magneto-electricity switch, and kinds of transducers.
|
Type |
(BH)Max |
Br |
Hcb |
D |
a(Br) |
Tc |
Tw |
|||
|
KJ/cm3 |
MGOe |
mT |
Gs |
KA/m |
Oe |
g/cm3 |
﹪/K |
℃ |
℃ |
|
|
LN9 |
680 |
6800 |
30 |
380 |
-0.03 |
760 |
450 |
|||
|
LN10 |
600 |
6000 |
40 |
500 |
-0.03 |
760 |
450 |
|||
|
LNG12 |
720 |
7200 |
45 |
500 |
-0.03 |
810 |
450 |
|||
|
LNG13 |
700 |
7000 |
48 |
600 |
-0.03 |
810 |
450 |
|||
|
LNG34 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG37 |
1200 |
12000 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG40 |
1250 |
12500 |
48 |
600 |
-0.02 |
860 |
525 |
|||
|
LNG44 |
1250 |
12500 |
52 |
650 |
-0.02 |
860 |
525 |
|||
|
LNG52 |
1300 |
13000 |
56 |
700 |
-0.02 |
860 |
525 |
|||
|
LNGT28 |
1000 |
10000 |
58 |
720 |
-0.025 |
860 |
550 |
|||
|
LNGT36J |
700 |
7000 |
140 |
1750 |
-0.025 |
860 |
550 |
|||
|
LNGT32 |
800 |
8000 |
100 |
1250 |
-0.025 |
860 |
550 |
|||
|
LNGT40 |
800 |
8000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT60 |
900 |
9000 |
110 |
1380 |
-0.025 |
860 |
550 |
|||
|
LNGT72 |
1050 |
10500 |
112 |
1400 |
-0.025 |
860 |
550 |
|||
We are a holding magnets manufacturer,we hope our products can benefit you.
Now we have strong fishing magnets for sale, if you have any needs, contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Magnetic Push Pins | Product Category: magnetic pins/push pin magnets/magnetic push pins Product Material: transparent colorful plastic+neodymium disc magnets Available... |
|
|
AlNiCo Magnets | alnico magnets china china alnico magnets alnico magnets for sale Category: alnico magnets China, China alnico magnets Advantages: high magnetic e... |
 |
Transparent Whiteboard Magnets | Product Category: office magnets/whiteboard magnets/transparent whiteboard magnets Product Material: transparent plastic(PS)+ferrite disc magnet... |
 |
Magnetic Grate Separators/Magnetic Grid Separators | Magnetic grate also is known as the magnetic shelf, magnetic frame, magnetic stand and magnetic hopper grate. Magnetic grate separatorsare assem... |
 |
Neodymium Tube Magnets | Tube magnets are permanent magnets in a tube shape. The tubes made of magnetic material are called magnet tubes or magnetic tubes. It becomes to be... |
Похожие товары
 |
Cable Wire Recycling Production Line | Продавец: Changzhou Optima Technology Co.,Ltd. | Cable Wire Recycling Production Line 1000kg Copper Wire Recycling Machines: The biggest ca... |
 |
Small Cable Granulator and Separator | Продавец: Changzhou Optima Technology Co.,Ltd. | Small Cable Granulator and Separator : Small shape,1 phase power,grind and separate copper f... |
 |
Turnkey service of tire recycling | Продавец: Changzhou Optima Technology Co.,Ltd. | Turnkey service of tire recycling At , we specialize in manufacturing advanced tire recyclin... |
 |
Mobile Portable Tire Shredder | Продавец: Changzhou Optima Technology Co.,Ltd. | Mobile Portable Tire Shredder Mobile Portable Tire Shredder – A cost-effective soluti... |
 |
Aluminum wire rod rewinding machine | Продавец: Changzhou Optima Technology Co.,Ltd. | Aluminum wire rod rewinding machine Basic Introduction 's is engineered with advanced Korea... |
