Adapter Charger Housing Mold 496-1

Mould Name: Adapter Charger Housing Mould

Part Material: PC

Product Size: 58.3*57.9*8.6mm

Product Description: Adapter Charger Housing UK

Mould Cavity: 4 Cavities

Mould Size: 400*450*343MM

Suitable Injection Machine: 160 ton

Mould Cavity Steel: ASSAB8407

Mould Injection System: Cold runner w/ tunnel gate

Mould Ejection System: Ejector Pin

Mould Cycle Time: 26's

Mould Life Cycle: 500,000

Lead Time: 60 days

Mould Features: 8 Sliders

Adapter mold is also AC charger mold, HanKing has made a lot of such moulds. For the adapter mold or AC charger mould, the appearance is important as well as the part dimension.

What issues should be noted in the tooling design?

First, we should choose the parting line of the part, parting line in cavity side, and parting line in the core side and it's very important to get customers' approval for the parting line.

The mold designer must choose the appropriate gate position and diameter of the gate according to the structure of the product and the requirements of the clients. For this charger mould, we normally suggest using point gate.

How to release the plastic adapter from the mould also requires careful consideration by the designer. Designers must carefully study the structure of the product, using sliders, lifters and ejection mechanisms to help the product smoothly get out of the mold cavity.

Manufacturing tips: shut-off angle along the slider moving direction as well as polishing the steel along the direction of product removal.

When some areas make the mould ejection out difficulty, find out the solution and send a proposal to the customer.

Try to make insert in the complicate area and to confirm the split line of insert pin with customers.

Reasonable use of ejector pin, ejector sleeve, ejector blade, etc. mechanisms, the distribution of the ejector pin should be even and balance.

The texture and polish are different in the cavity and core of the mould.

Most of the time, the plastic part drawing from the customer is not designed with a draft angle, we should propose to increase the draft angle within the allowable range.

It should be recessed on the bottom surface to avoid sink mark because of the wall thickness of the pillars.

The designer should check if any ribs or holes are not able to put ejector pin.

Sharp steel is must be avoided.

Hanking mouldhas excellent experience in Adapter Charger Mould, we made Adapter Mould for different country standard, good water cooling to get the beautiful part surface, and automatic ejection.

If you want to know more about ac mould engineering limited, please visit our website.

As one of china injection molding suppliers, we will do our best to meet all customers’needs.

Другие товары поставщика

	Gear Mold	Plastic Gear Mold Design 49122 Mould Name: Custom Plastic Gear Mould Part Material: PA6 Product Size: 33*16.5mm Product Description: Plastic Mot...
	Insert Molding Technologies for Automotive Industry	Mould Type: Automotive Sensor Plastic Injection Mould Production Material: Nylon PA66 No of Cavities: 4 cavities Core Material: S7 Cavity Mater...
	Home Appliance Molding Parts	Household Appliances Mould Parts High Gloss Plastic Finish Parts High gloss polish finishing plastic injection molded parts The part is thin and ...
	Industrial Molding Parts	Industrial hanking mould parts are referred to the plastic parts of industrial products, HanKing Mould Enginering Ltd.preferred to think of it as n...
	Home Appliance Mould	Home Appliance Mould Embroidery Machine Frame Mould 4937-2 Plastic frame for a multi-needle embroidery machine. Mould Name: Embroidery Machine Fra...

Все товары поставщика

Похожие товары

	Microcrystalline wax as rust inhibitor	Продавец: Syntop chemical Co.,Ltd.	Microcrystalline wax is indeed one of the key ingredients in rust inhibitors. Thanks to its excel...
	Microcrystalline wax used in lubrication and sealing	Продавец: Syntop chemical Co.,Ltd.	Thanks to its high gel strength, strong adhesion, good flexibility, and excellent temperature res...
	нембутал | Пентобарбитал | Дигнитас | Пегасы в Европе	Продавец: Как безопасно купить Нембутал (пентобарбитал) онлайн в Европе	Dignitas и Pegasos продаются в Европе Dignitas и Pegasos Nembutal продаю...
	Цена на Нембутал в Испании | Цена на пентобарбитал в Италии	Продавец: Как безопасно купить Нембутал (пентобарбитал) онлайн в Европе	Dignitas и Pegasos продаются в Европе Dignitas и Pegasos Nembutal продаю...
	Купить пентобарбитал во Франции | Купить нембутал в Испании и Европе	Продавец: Как безопасно купить Нембутал (пентобарбитал) онлайн в Европе	Dignitas и Pegasos продаются в Европе Dignitas и Pegasos Nembutal продаю...