RPS-20M Radio Probe System

RPS-20M wireless cnc probesystem contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated part set-up and in-cycle gauging on machining centers, including 5-axis machines. RPS-20M wireless touch probesystem used in various specifications of machine centers, large-scale gantry machine, five-axis CNC machine tools and so on.

RPS-20M radio probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated part set-up and in-cycle gauging on machining centers, including 5-axis machines. RPS-20M radio probe system used in various specifications of machine centers, large-scale gantry machine, five-axis CNC machine tools and so on.

Parameter of RPS-20M Radio Probe System

RP610M：
Measuring direction	±X，±Y，+Z
Arbitrary direction swinging angle	X-Y±15°, Z +5 mm
Repeatability （2σ）	≤ 2 μm；
Trigger force in Z direction	600±30（g）
Trigger force in X-Y direction	50-100（g）
Radio signal receiving/sending distance	>14m
Model of the standard stylus	M4-P50-RB6-S36
Model of the battery	14250，3.6 (V), 2 Pcs
Seal grade	IP68

RSI-20M
Radio signal receiving/sending distance	>14m
Frequency of the radio signal
Quantity of the radio channel	16
Input voltage	24±10% VDC
Output load current	50mA
Length of the cable	8m
Length of the cable retaining tube	2m
Seal grade	IP68

Application of RPS-20M Radio Probe System

RPS-20M has a transmission distance of up to 14 m, which is suitable for five-axis machining centers and large machine tools equipped with complex fixture components.

The radio probe transmits signals by radio and can be applied to the measurement of deep cavity workpieces.

Radio probes are often used on double-head lathes to process large parts such as automobile axles

Technical Characteristics of RPS-20M Radio Probe System

Probe switch on/off method:：Range on/off、M code on/off;

Radio code signals are used to transmit information between the probe and the receiver. The time to transmit and to decode a group of signals is less than 1ms;

The transmission frequency of the radio signal is within 2.4 G-2.483 G, the number of transmission channel is 16;

Output four kinds of SSR signals to machine control system when probe is in the states of trigger、error、probe batteries low and output pulse;

The RSI-20 receiver can change its logical state of the output signal by setting;

The LED lights in the receiver show the working status of the probe system.

Pioneeris a professional probe factory, we provide touch probe, cnc machine probe, wireless probe cnc, cnc touch probe wireless, probe manufacturingand etc. Want to know more? Please contact us.

Другие товары поставщика

	CNC Machine Tool Touch Probe System	Pioneer touch probes for CNC machines can measure and find the base position of the workpiece quickly and accurately, set or modify the workpiece c...
	Problems That Should Be Paid Attention to when Calibrating the Touch Trigger Probe	touch trigger probesis smaller than the static diameter After learning about the principle of probe calibration, we can easily explain why t...
	EP60 Electrical Probe	EP60 Electric probe includes a electric probe unit and a taper shank. There is an unclosed power circuit inside the probe. When the stylus contacts...
	Probe Stylus	Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua...
	RPS-L11M Radio Probe System	RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software. The RPDM is a radio fre...

Все товары поставщика

Похожие товары

	ETH Ethereum Jasminer X4 BRICK ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Jasminer X4 Brick Review Jasminer x4 brick for salefrom Jasminer mining EtHash algorithm with a ...
	ETH Ethereum Jasminer X4-1U ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	TheJasminerx4-u1 miner has a different look than the X4 mining unit. So you get a miner with a sl...
	ETH Ethereum Jasminer X16 ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model X16Qfrom Jasminer mining EtHash algorithm with a maximum hashrate of 1.845Gh/s for a power ...
	ETH Ethereum iPollo V1 Mini SE Plus ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SE Plusfrom iPollo mining EtHash algorithm with a maximum hashrate of 400Mh/s for a...
	ETH Ethereum iPollo V1 Mini SE ASIC Miner	Продавец: Shenzhen Dovina Electronic Co.,Ltd	Model V1 Mini SEfrom iPollo mining EtHash algorithm with a maximum hashrate of 200Mh/s for a powe...