M10 Solar Cell

• 

Compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading difficulty, current product yield, and other factors, the M10 cellbusbar P-type bifacial half-cut is the best size to achieve ultra-high power modules, more mature industrial ecology, fewer transportation problems.

Higher Generation Process Of The Modules

The M10 cell P-type bifacial solar cellscould provide up to 30% of the gain in the generation process of the modules, as for the half cut cell technology has a higher conversion efficiency than the full piece.

Lower Rated Operating Temperature

Compared with the full cell modules, the temperature of the half-cut solar cell module is 2-3 degrees lower, and the hot spot temperature is 10-20 degrees lower.

Lower Shadow Shielding Loss

M10 cell has a lower shadow shielding loss.

Types Of The M10 Solar Cells For Sale

The P-type bifacial half-cut cell could provide up to 30% of the gain in the generation process of the modules, as the half-cut cell technology has a higher conversion efficiency than the full piece, and also a lower-rated operating temperature. Compared with the full cell modules, the temperature of the half-cut cell module is 2-3 degrees lower, the hot spot temperature is 10-20 degrees lower, and it has a lower shadow shielding loss.

Compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading difficulty, current product yield, and other factors, the M10 cell busbar P-type bifacial half-cut is the best size to achieve ultra-high power modules, more mature industrial ecology, fewer transportation problems.

Applications of the M10 Solar Cells

Sunrise M10 cell is mainly used for Aquaman series solar modules. It supports single-sided, double-sided, and all-black customization requirements. The size can be provided according to the installation scene, such as 108 cells, 120 cells, 144 cells, 156 cells, etc. After high-precision packaging The maximum module power is 595w.In distributed photovoltaic systems, medium and large ground power stations have mature applications. Compared with conventional modules, M10 modules are the optimal size to match the market.

If you want to buy high quality mono perc cell, please contact us.

There are many solar products suppliersin China, but we are one of the best choices for you.

More types of solar energy devices, please visit our website.

Другие товары поставщика

	P-TYPE M10 SERIES MODULES	Sunrise P-type M10 module - Aquaman series, using 182mm monocrystalline cells, module output power 350-565w, with four versions of 48/54/60/72. The...
	G12 Solar Cell	G12 large size silicon chip can improve the production efficiency from silicon chip to battery chip to module. At the same time, the production and...
	Off Grid Industrial Solar Panels	The commercial off grid solar systems based on module design is also more widely used. It consists of solar modules, controllers, inverters, batter...
	ON GRID SOLAR PANEL	What Is a Grid Connected PV System? On Grid Solar Panel Residential PV generation is a model of using PV power stations as consumer goods, reside...
	ON GRID SOLAR PANEL	What is a grid connected pv system The generated electricity will be fed into the grid, and the grid is used as an energy storage device. When the...

Похожие товары

	FT wax used for EVA-based hot melt adhesive	Продавец: Syntop chemical Co.,Ltd.	Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for...
	high melting point FT wax improve the heat resistance of adhesives	Продавец: Syntop chemical Co.,Ltd.	FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische...
	For hot melt adhesive high melting point FT WAX	Продавец: Syntop chemical Co.,Ltd.	The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ...
	Diesel Injection Delivery Valve 1W6982	Продавец: China lutong	Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection...
	High melting point FT wax used as plastic processing additives	Продавец: Syntop chemical Co.,Ltd.	Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm...