Optical Tool Setter
OTC200 optical tool setter/optical tool presetteris a wireless tool setter, optical coded signals are used to transmit information between the CNC tool setter and the receiver. It mainly used in various specifications of small to medium machining centers, CNC milling machines, drilling machines center, electronic touch off tooland so on. It used for broken tool detection and rapid measurement of tool length and diameter on a wide range of tools.
Parameter of Optical Tool Setter
|
OTC200： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Optical signal receiving/sending distance |
>3m |
|
Model of the standard stylus |
M0-S31.5-CP12.7 |
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
Seal grade |
IP68 |
Technical Characteristics of Optical Tool Setter
Tool setter switch on/off method: M code on/off；
Compatible with Pioneer optical modulated receivers (OSI-20M and OSI-30);
Exceptional resistance to light interference with modulated transmission;
Cable-free for unrestricted machine movement and ease of installation.
Application of Optical Tool Setter
For tool measuring on small to medium machining centers.
Detect broken tools in-process
Compensate for environmental and machine conditions
Reduce non-productive time and scrap and increase productivity and profits
Pioneeris a professional probe manufacturer, we provide probe manufacturing, tool pre setter, haas tool setter, haas tool presetter, presetter tool, cnc measuring probeand etc. Want to know moreabout haas lathe tool presetter calibration? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
OPS-30 Optical CNC Probe System | OPS-30 optical transmission probesystem with special cnc probe programmingcontains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and ... |
 |
OPS-30 Optical CNC Probe System | OPS30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard mea... |
 |
RPS-20M Radio Probe System | RPS-20M radio probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe wit... |
 |
M4 Screw Probe Stylus | M4 screw stylus is usually used for the high-precision probes and the special probes of the company's various series of machine tools.The M4 screw ... |
 |
Optical Tool Setter | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
Похожие товары
 |
YC160W Wheel excavator YC160W | Продавец: Guangxi Yuchai Equipment Technology Co., Ltd | YC160W Wheel excavator YC160W wheel excavator is a new generation of full hydraulic wheel excavat... |
 |
Yuchai U20 mini excavator | Продавец: Guangxi Yuchai Equipment Technology Co., Ltd | Yuchai U20 mini excavator Improvements in Over 80 Details: Tailless Excavator U20 is a Yuchai ... |
 |
Yuchai YC80 small excavator | Продавец: Guangxi Yuchai Equipment Technology Co., Ltd | Yuchai YC80 small excavator International brand engine It is equipped with Yanmar 4TNV98C natur... |
 |
Top Type Hydraulic Breaker | Продавец: Guangxi Yuchai Equipment Technology Co., Ltd | Top Type Hydraulic Breaker With the higher restriction of blasting control,hydraulic breakeris w... |
 |
S35-Electric Skid Steer Loader | Продавец: Guangxi Yuchai Equipment Technology Co., Ltd | S35-Electric Skid Steer Loader Yuchai S35 Electric Skid Steer Loaderis compact and flexible, des... |
