40km Dispersion Compensation Fiber
In optical fiber communications, dispersion compensation modules (DCM) (also called dispersion compensation units, DCU) can be used for compensating the chromatic dispersion of, e.g., a long span of transmission fiber.
Typically, such a module provides a fixed amount of dispersion (e.g. normal dispersion in the 1.6-μm spectral region), although tunable dispersion modules are also available.
A module can easily be inserted into a fiber-optic link because it has fiber connectors for the input and output. The insertion losses may be compensated with a fiber amplifier, e.g. an erbium-doped fiber amplifier in a 1.5-μm telecom system. A dispersion-compensating module is often placed between two fiber amplifiers.
40km Dispersion Compensation Fiber Dispersion Compensation Principle
Dispersion is one of the transmission properties of the optical fiber, and the optical pulse signal will be broadened in time after transmission in the optical fiber for a distance, which produces inter-symbol interference, thus increasing the error rate and affecting the quality of communication.
The higher the data rate is, the more easily the inter-symbol interference will present.
The longer the transmission distance is, the more easily the inter-symbol interference will present.
40km Dispersion Compensation Fiber Feature
100% slope compensation of G.652 fiber in C-band ( Typical )
Low insertion loss
Low polarization mode dispersion
Wideband dispersion compensation
Compensation up to 40 km
Completely passive—no powering utilized
Telcordia GR-2854-CORE, ROHS compliant
40km Dispersion Compensation Fiber Specification
|
Product Model |
DCF40A |
|
Equivalent G.652 compensation length |
40km |
|
1545nm wavelength dispersion(ps/nm) |
-670±30 |
|
1545nm wavelength relative dispersion slope |
|
|
Insertion loss |
≤4.8 dB |
|
Polarization mode dispersion |
≤0.9 ps |
|
Nominal single-wave input optical power |
≤0 dBm |
|
Optical interface |
All interfaces are LC type |
|
Typical power consumption |
0W (passive components) |
|
MTBF |
> 200000 hours |
|
Occupied slot number |
2 slots (dispersion compensation board over 40km need to be configured individually with the DCF passive frame) |
As a professional wdm optical transceivers supplier, we provide china optical, dwdm transponder, edfa amplifierand etc. For more information about dispersion compensating fiber pdf and dispersion compensation techniques, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
8CH CWDM Mux Demux | 8 channel cwdm mux demux module provide the most robust and low-cost bandwidth upgrade for your current fiber optic communication networks. The cor... |
 |
100G Coherent DWDM Transponder | 100G OTU card launched by Sintai Communication Co., Ltd. supports one 100G service access, adopts advanced technologies such as PDM-QPSK modulation... |
 |
18CH CWDM Mux Demux | Advantages of Demultiplexer The CWDMmultiplexer/demultiplexer launched by Guangzhou Sintai Communications Co., Ltd. is designed for economical a... |
 |
10G OEO Repeater | The OEO optical amplification subsystem launched by Guangzhou Sintai Co., Ltd adopts the clock and data recovery (CDR) chip design with the highest... |
 |
OLP Optical Line Protection | Hot-swappable plug-in OLP card only occupies 1 slot in the 1U/2U/5U chassis, which can be highly integrated with SINTAI management platforms and OE... |
