3 inch Butterfly Valve
Categories: Butterfly Valve, Butterfly Valve By Inch
Tags: Butterfly Valve Wafer Type, Wafer Type Butterfly Valve
What is 3 Inch Wafer Type Butterfly Valve?
Butterfly valve 3 inchis a flow control mechanism that uses a rotary disk to control the flow medium in the system. The disk remains in the passage, but since it is so thin, it gives very little resistance to the flow.
The most common type of butterfly valve arrangement is a centric or a concentric butterfly valve. This type of butterfly valve consists of the stem which travels along the middle line of the disk in the center of the pipe bore and the seat is inside diameter of the body of the valve. This no offset valve configuration is also known as a resilient-seated valve as it depends on the flexibility of the seat rubber when the flow is closed, for the reliability of the seal. In this type of valve, the disk first interacts with the seat at about 85° for a 90° rotation. Concentric butterfly valves are widely used in low-pressure applications.
Dimensions & Weight of 3 Inch Butterfly Valve
|
Pressure Rating |
Face to Face Dimension(in mm) |
Weight |
||
|
RF |
WAFER |
LUG |
kg |
|
|
CLASS 150 |
114 |
46 |
46 |
8 |
Applications of 3 Wafer Type Butterfly Valves
General Industrial
HVAC
Water
Chemical/Petrochemical Processing
Food and Beverage
Power and Utilities
Pulp and Paper
Marine and Commercial Shipbuilding
Features of 3 Inch Wafer Type Butterfly Valve:
Suitable for both gaseous and liquid service.
Phenolic Backed Seat for superior sealing and long term use.
Single-piece stem design assures even torque distribution.
Positive shutoff bi-directionally.
Direct mount automation.
Material of 3 Inch Butterfly Valve:
|
No |
Part |
Material |
|
1 |
Body |
GGG50 / ASTM A126 B |
|
2 |
Seal Ring |
EPDM / NBR |
|
3 |
Pin |
ASTM A276 304 |
|
4 |
Disc |
ASTM A351 CF8 |
|
5 |
Stem |
ASTM A276 420 |
|
6 |
Stem Packing |
EPDM |
|
7 |
Bolt |
ASTM A193 B8 |
|
8 |
Nut |
ASTM A194 8 |
If you want to know more about butterfly valve 3 inch price, please contact us.
We also have kinds of 4 inch electric butterfly valveand 6 inch flanged butterfly valvefor sale, if you have needs, please leave us a message.
As a valve manufacturer, we can provide sorts of high quality china forged ball valvefor customers, anything you need, please leave us a message.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| 6 Inch Ball Valve | Description of 6 inch valve: ZECO group valveis a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been produci... | |
| Backflow Preventers | The concentricbutterfly valveis characterized by the stem center, disc center and body center in the same position. Such structures are simple to m... | |
| Strainer & Dirt Separator | Strainers, dirt separators and backflow preventers are designed to prevent impurities from entering the specified pipe section. Comparing these thr... | |
| Clean Water Air Release Valve | Basic informationThis is installed at the highest point of the pipe or where there is a closed air, which is used to discharge the gas in the pipe ... | |
| Resilient Gate Valve for Underground 1025 | Basic information of Wafer Concentric Butterfly Valve with Post IndicatorThis valve can be used to open or close the medium in the fluid pipe and i... |
Похожие товары
| FT wax used for EVA-based hot melt adhesive | Продавец: Syntop chemical Co.,Ltd. | Fischer-Tropsch wax is a commonly used performance modifier in hot melt adhesives, especially for... | |
| high melting point FT wax improve the heat resistance of adhesives | Продавец: Syntop chemical Co.,Ltd. | FischerTropsch wax is an alkane polymer produced from synthesis gas or natural gas via the Fische... | |
| For hot melt adhesive high melting point FT WAX | Продавец: Syntop chemical Co.,Ltd. | The key advantage of high-melting-point Fischer-Tropsch wax in hot-melt adhesives stems from its ... | |
| Diesel Injection Delivery Valve 1W6982 | Продавец: China lutong | Diesel Injection Delivery Valve 1W6982 Diesel Injection Delivery Valve 19AChris Diesel Injection... | |
| High melting point FT wax used as plastic processing additives | Продавец: Syntop chemical Co.,Ltd. | Due to its high purity, low oil content, narrow melting range, high hardness, and excellent therm... |













