MCU ARM7 HF RFID Reader/Writer Module JMY610
JMY610 series are RFID reader/writer module with UART and IIC serial ports. JMY610 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. And the module and antenna are separate design. 50ohm coaxial line is linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability.
- Qualifications:
- • PCD: NXP RC5 , 00RC531 , RC632
- • Working frequency: 13.56MHz
- • RF standard: ISO14443A, ISO14443B , ISO15693
- • Operating distance: 100mm(depending on card and antenna design)
- • Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- • Auto detecting card: Supported, default ON
- • EEPROM: 512 Bytes
- • Interface: RS232C
- • Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- • Max.command length: 1024 Bytes
- • Interface level: 3.3V(TTL level; 5V tolerance)
- • Power supply: DC 2.7V ~ 5.0V
- • Power consumption: 150mA
- • Dimension: 87mm×65mm×10mm
- • Weight: about 15g
- • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- • ISP: Supported
- • RoHS: Compliant
Другие товары поставщика
|
|
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 |
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
|
|
HID standard USB interface HF RFID Reader Module JMY608 |
JMY608, based on NXP SL RC400, is the reader module. The module supports series IC cards according to ISO15693, and imitates the USB keyboard to re... |
|
|
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 |
JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
|
|
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 |
JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. Th... |
|
|
Surface Mount Package HF RFID Module JMY622 |
JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards.... |
Все товары поставщика
Похожие товары
