PC Injection Molding

• 

PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (155 degrees Celsius in the case of Polycarbonat). A major useful attribute about thermoplastics is that they can be heated to their melting point, cooled, and reheated again without significant degradation. Instead of burning, thermoplastics is like Polycarbonate liquefy, which allows them to be easily injection molded and then subsequently recycled.

PC is commonly used for plastic lenses in eyewear, in medical devices, automotive components, protective gear, greenhouses, Digital Disks (CDs, DVDs, and Blu-ray), and exterior lighting fixtures.

Injection molding most often produces parts by polycarbonates and their blends. Since polycarbonate is highly viscous, it is usually processed at high temperature to reduce its viscosity. In this process, the hot polymer melt is pressed through into a mold with high pressure. The mold when cools, gives the molten polymer its desired shape and characteristics. This process is generally used to manufacture polycarbonate bottles, plates etc. Since polycarbonate is a poor-flowing plastic, wall thickness should not be too thin.

Properties of PC Injection Molding

Mechanical performance: high strength, fatigue resistance, dimensional stability, and small creep (also rarely changes under high temperature conditions);

Heat aging resistance: The enhanced UL temperature index reaches 120 ~ 140 ℃ (long-term outdoor aging is also very good);

Solvent resistance: no stress cracking;

Stability to water: easy to decompose under water at high temperature (use caution in high temperature and high humidity environment);

Insulation performance: excellent (moisture and high temperature can also maintain stable electrical performance, is an ideal material for manufacturing electronic and electrical parts);

Dielectric coefficient: 3.0-3.2;

Arc resistance: 120s;

Form ability: injection molding or extrusion of ordinary equipment.

We provide custom plastic injection molding china,polycarbonate injection,pc abs injection molding,molding polycarbonate,polycarbonate injection moldingand injection molded parts,you can consult us injection molding costand can polycarbonate be injection molded,contact us now.

Другие товары поставщика

	Injection Molding Material	With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold an...
	2K /2 Shot Injection Molding	A 2K/two-color mold is a mold in which two plastic materials are injected on the same injection molding machine and molded in two parts, but the pr...
	ABS Injection Molding	Plastic ABS resin is the polymer with the largest output and the most extensive application. It organically unifies the various properties of PB, P...
	Acrylic Injection Molding	Acrylic is a transparent thermoplastic homopolymer known more commonly by the trade name “plexiglass.” The material is similar to polyc...
	POM Plastic Injection Molding	POM Plastic Injection Molding POM injection molding, Polyacetal, also known as acetal or polyoxymethylene (POM), is a formaldehyde-based, semi-cry...

Похожие товары

	MONSA® DDAC-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: MONSA® DDAC-50 It functions by causing the cell membrane of bacteria to rupture...
	MONSA® DCA-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: disodium cocoampho diacetate Disodium cocoamphodiacetate for skinis a very mild amp...
	MONSA® CTAC-50	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: Cetyl Trimethyl Ammonium Chloride Cetyl Trimethyl Ammonium Chloride is an ammonium ...
	MONSA® CTAC-30	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: Cetyl Trimethyl Ammonium Chloride 30% Cetyltrimethyl ammonium chloride30% is mainly...
	MONSA® CT-35	Продавец: Guangzhou Monsa Chemical Co., Ltd	INCI name: Sodium Methyl Cocoyl Taurate MONSA® CT-35 is mild, anionic co-surfactant, which...