Blowout Preventor(BOP)
Ram BOP
Single and double ram type BOPs are widely used in oilfield and offshore platform. They have the features of compact structure, easy handling and reliable seal. The pipe ram adopts the pressure increasing seal way, which makes it seal drill tool rapidly and efficiently, even remain its seal effect after the disappearance of fluid control pressure.
The open or close of ram preventor and ram replacing are both hydraulically controlled. The onsite replacing of pipe ram and sealing parts saves much time.
•Driving mode：Manual & hydraulic
•End connection：Flanged and bolted
•Working pressure：2000~10000PSI
•Nominal bore：90mm、120mm、179.4mm、279.4mm、346mm
•Executive standard: API 16A and relevant specification
Annular BOP
In case of blowout and well-sealing is needed,high pressure oil coming from control system enters the bottom closing chamber from bottom inlet to push piston moving upward.The movement of piston forces tubber core to move upward along the sphere surface, then supporting ribs get closer to push the internal rubber towards the wellhead center to fulfill the function of sealing drill equipment or the wellhead. When unlocking the seal is needed,hydraulic oil pushes the piston moving downward and the rubber core will reset to its original under its elastic force.
Structure Characteristics
1.The connection between top cap and housing ,top and bottom ends adopt flanges and bolts.
2.Semisphere rubber core has many advantages,such as not easy folding back, big volume of rubber storage.Under the well pressure,the piston pushes the rubber core upward to form a funnel shape.The funnel effect of rubber core increases its sealing performance and life span.
3.Characteristics of the sealing structure
The BOP has three important sealing positions:piston external surface seal,piston internal surface seal and mud blocking ring seal.Radial direction cross sectionof the piston comes of the shape"Z",which makes the piston have short stroke length,low height and big diameter.There are two wear-rings stick to the external surface of the piston and a wear-ring stick to the internal surface of the housing.The structure prevents metal to metal contact and protects piston and housing.
Другие товары поставщика
|
|
DDZ Elevators |
Elevators
DDZ Elevators
Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The elevators are ... |
|
|
Spider |
Spider
The Hinged Casing Spider
It has a hinged spider body with a split insert bowl. It is put above rotary table, can handle most casings of... |
|
|
Rotary Reamer |
Introduction:
Rotary Reamer is designed for various reams in drilling operation. Especially it can perform the double functions of centralization ... |
|
|
Swivel |
Design Features：
Standard bail and double pin (male) alloy sub
The washpipe and packing are box structure, convenient to replacing on drill floo... |
|
|
Fishing Magnet |
The Fishing Magnets are used to retrieve all types of small objects having magnetic attraction from bore hole bottoms. Such undrillable objects as ... |
Все товары поставщика
Похожие товары
