MANUAL TONGS
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs. They are designed and manufactured according to API Spec 7K.
Manual tong type B:
No.of Latch Lug Jaw Latch Step Size Range Rated Torque
in mm kN•m
5a 1 3 3/8~4 1/8 85.7~104.8 55
2 4 1/8~5 1/4 104.8~133.3 75
5b 1 4 1/4~5 1/4 107.9~133.3
2 5~5 3/4 127~146
3 6~6 3/4 152.4~171.4
5b1 1 5 1/4~5 3/4 133.3~146
2 6~6 5/8 152.4~168.3
3 6 3/4~8 171.4~203.2 55
5c 1 6 5/8~7 3/8 168.3~187.3 75
2 7 3/8~8 187.3~203.2
3 8 1/2~8 5/8 215.9~219 55
5d 1 8 1/2~9 5/8 215.9~244.5
2 10 5/8~10 3/4 269.9~273
5e 1 11 3/4 298.5
2 12 3/4 323.8
5e1 1 10 3/4 273
2 11 3/4 298.5
5e3 1 13~13 3/8 330.2~339.7
Manual tong type DB:
No. of Latch Lug Jaw No. of Hinge Pin Hole Size Range Rated Torque
in mm kN•m
1# Ⅰ 3 1/2~6 88.9~152 90
Ⅱ 5 3/4~7 146~178
Ⅲ 6 5/8~8 1/4 168~210
2# Ⅰ 8~9 5/8 203~244
Ⅱ 10 5/8~11 1/4 270~286
3# Ⅰ 11 3/4~12 3/4 298~324 55
Ⅱ 13 3/8~14 3/8 340~365
4# Ⅱ 16~17 406~432
Manual tong type C:
Lug Jaw No. Short Jaw No. Hinge Jaw No. Pipe Size Rated Torque
in mm KN•m
1# 1# / 2 3/8-3.668 60.33-93.17 48
2# 1# / 2 7/8-4 1/4 73.03-108
3# 1# / 3 1/2-5 1/4 88.9-133.35
4# 1# / 5 1/2-7 139.7-177.8
5# 2# 1# 7-8 5/8 177.8-219.08
6# 2# 2# 9 5/8-10 3/4 244.5-273.05
Manual Tong Type AAX
Lug Jaw No. Pipe Size Rated Torque
in mm KN•m
1# 2 7/8-3 3/4 73-95.25 75
2# 3 1/2-4 1/2 88.9-114.3
3# 4-5 1/4 101.6-133.35
4# 5-7 1/4 127-184.15
5# 6 7/8-8 5/8 174.6-219.1
6# 9-10 3/4 228.6-273.05 40
7# 10 3/4-11 3/4 273.05-298.45
8# 13 3/8 339.7
Другие товары поставщика
|
|
DrawWorks |
DrawWorks
The Single-shaft Electric Drawwork:
The drawwork is single-shaft with grooved drum structure, has less spare parts, small cubage, ligh... |
|
|
Mud Pump |
Triplex Mud Pump
F Series Triplex Mud Pump is designed according to Emsco F series mud pump, its expendable parts at the fluid end are interchangea... |
|
|
Blowout Preventor |
Blowout Preventor(BOP)
Ram BOP
Single and double ram type BOPs are widely used in oilfield and offshore platform. They have the features of compa... |
|
|
стол бурового ротора Rotary Table |
Design Features：
Gear and pinion are made of alloy steel
Split main bushing is steel cast. Kelly drive and slip drive are available for choose.
S... |
|
|
Junk Mills |
The junk mill are designed to mill away metal objects, such as alloy-steel packers, squeeze tool, perforating guns, drill pipe, tool joints, reamer... |
Все товары поставщика
Похожие товары
