High speed conventional heavy duty lathe price
High speed conventional heavy duty lathe price
This machine tool belongs to heavy machine tool,the maximum weight is 16 tons, adopt the rectangular guide rail, can be able to cut the end section of all kinds of parts,outer circle, inner hole and metric system, English system, modulus, state thread.
Main configuration:
StandardConfiguration:
1. Bed rail width 1100,Two top-load bearing 16 tons
Optionalconfigure:
1. Double saddle add another 80,000.
2. Roller additional price of 25,000 yuan
UNIT |
C61180 |
||
CAPACITIES |
Swing over bed |
mm |
1800 |
Swing over carriage |
mm |
1450 |
|
Max.length of workpiece |
mm |
3000-12000 |
|
Max.turning length |
mm |
2800-11800 |
|
Pan of guideway |
mm |
1100 |
|
Spindle nose |
mm |
A2-15 |
|
Spindle bore |
mm |
100 |
|
Taper hole of spindle |
Metric140 |
||
Range of spindle speeds |
r/min |
Forward:3.15~315;Reverse:3.5~291 |
|
SPINDLE |
No.of spindle speeds |
Forward:21; Reverse:12 |
|
No.of Longitudinal and cross |
56/56 |
||
Feed per revolution |
mm |
Longitudinal:0.1~12;Transverse:0.05~6;Up turret:0.025~3 |
|
No. and range of metric thread |
44;1~120mm |
||
No. and range of inch thread |
31;28~1/4″ |
||
No. and range of module thread |
45;0.5~60mm |
||
TAILSTOCK |
No. and range of dia. thread |
38;1/2~56DP |
|
Distance of centerline and tool resting plane |
mm |
53 |
|
Tool post swing range |
° |
±90° |
|
Max.travel of cross slide |
mm |
900 |
|
Max.travel of top slide |
mm |
360 |
|
Section of tool shank |
mm |
50(380x380) |
|
Travel of tool post (per turn of dials) |
mm |
0.05(0.002″) |
|
OTHERS |
Dia. of tailstock |
mm |
260 |
Travel of tailstock quill |
mm |
300(12″) |
|
Taper hole of tailstock quill |
Metric80 |
||
Main motor power |
kw |
30 |
|
Length |
mm |
6120-15120 |
|
Width |
mm |
2058-2580 |
|
|
Max.weight of workpiece |
t |
16 |
When the gear and gear ring are engaged, the four locking claws are connected, synchronously and at the same time, can hold the circular workpiece.When the gear and gear ring are separated, the four claws are independent, which are the same as the original four-jaw chuck.
Tail frame:mounted on the bed guide rail and moved vertically along this guide rail to adjust its position. The tail frame is mainly used to install the top, to support the long work piece, also can install the drill bit, reamer and so on the hole processing.
1. FOB Shanghai / Tianjin or CIF, LCL or FCL shipping.
2. Payment terms: T/T or other ways contact us.
3. Package: standard wooden case
4. Delivery time: Within 20 working days after the down payment. (Actual delivery time depends on actual order.
2. Check the acceptance
Receive machine,please check:
1. Examine the content of the packing list,the product quantity to both consistent,and accessories;
2. Machine tool details if they 're normal, If have the trace of replacement and maintenance, If have other effects use of the problem.
If happens above declare,please contact us immediately.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
boru ucu makinesi matkap tasmaları için | Описание продукта: Производственная линия по переработке и производству нефтяной буровой трубы,в основном разделена на три этапа,используя устройс... | |
View larger image Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe machine with good service Chinese heavy duty lathe mac | Chinese heavy duty lathe machine with good service This machine not only processing a variety of shaft, disk type parts and turning all kinds of ... | |
Yüksek nitelikli oranı yatay dövme pres makinesi matkap tasmaları için | Описание продукта: Производственная линия по переработке и производству нефтяной буровой трубы, в основном разделена на три этапа,используя устрой... | |
tube forming press | DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by usi... | |
Otomatik kontrol yatay dövme pres makinesi petrol çıkarılması için | Описание продукта: Производственная линия по переработке и производству нефтяной буровой трубы,в основном разделена на три этапа,используя устройс... |
Похожие товары
Cantilever-type glue MGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Structural Insulated Panel | Продавец: 824681 | Cantilever-typeglueMGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Struc... | |
Cleanroom Handmade Steel Panel with Rockwool/ PU/EPS/Paper Honeycomb/Aluminum Honeycomb | Продавец: 824681 | Cleanroom Handmade Steel Panel with Rockwool/ PU/EPS/Paper Honeycomb/Aluminum Honeycomb The gl... | |
Automatic Glue Spraying Machine for MGO Panels Fire-Proof Door Refrigerated Truck Body Panels | Продавец: 824681 | Automatic Glue Spraying Machine for MGO Panels Fire-Proof Door Refrigerated Truck Body Panels ... | |
Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying | Продавец: 824681 | Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying The ... | |
Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door | Продавец: 824681 | Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Doo... |