Spun Twisting Machine

Are you looking for yarn doubling machine?

Introduction of Spun Twisting Machine:

Spun twisting machine is a kind of twister machine for various yarns. This yarn twisting and doubling machinehas long service life, and adopts flooding system lubricating to lower friction loss. The spun twister machine has wide technological adaptability, stepless adjustment of angle of wind, forming length, short stroke length, and long-short stroke frequency and so on. The spun twisting machine is easy alteration and satisfied to optimize different products. Also the spun twisting machine has a nice winding shaping. There is various forming mode on the spun twisting machine to satisfy different yarn shaping demands of clients.

Controlled by PLC, three independent motors on the spun twisting machine are running with constant speed ratio, both during normal running conditions and start/stop phases. In case the power supply failure, PLC will control and reduce their three speeds progressively until the complete stop.

Features of Spun Twisting Machine:

>> Meet customers single-spindle, large package needs

>> Processing of raw materials. May twisting various polyester yarn, textured yarn, and nylon yarn, etc.

1) Traverse servo actuator, winding forming good

2) A variety of forming ways. Meet the requirements of different yarns forming

3) Single-spindle yarn broken lights, cutting operation

Technical Parameters of Spun Twisting Machine:

For raw materials: Monofilament 100D~1000D and Twisted wire 300D~2000D

Solutions retreat cheese: (Φ54~110）X(190~300) There are side tube, length 230,290mm

The number of sections: ≤10

Tenser: Ball, capsule

Twist（T/M): 100~2000

Starting method: Delta slow start

Twist: S or Z

Operation form: Double-sided single, lead wires lead yarn

Up speed: ≤60m/min

Spindle Transmission: Long tangential belt drive

Rated power: 14.7KW

Loading amount: 2-5kg

Winding brass: Φ54~70 L230、290mm

Variations technical parameters of Spun Twisting Machine:

Spindle gauge: 290mm or 330mm or 365mm or 405mm

Each section spindles: 16 or 12 or 12 or 10

Dimension (10): 25610X730X1656 22330X730X1656 24230X830X1656 22580X830X1656

Spindle speed: 5000-10000rpm

WSFis a company which is outstanding in providing various solutions of hank to cone yarn winding machinefor clients. RFQ today!

Другие товары поставщика

	RW360 Air Jet Loom	Introduction of RW 360 Air Jet Loom: RW 360 Air Jet Loom is a kind of advanced textile loom machine. This air jet textile machine has a total stop-...
	WSF200A Precision Winder-Hank to Cone	Introduction of WSF200A Precision Winder: WSF200A Precision Winder is a kind of hank winding machine and customized precision winder, which is the ...
	HANK WINDING MACHINE	Hank winding machineuses Our hank winding machine is a kind of precision winding machine for winding yarns from hank to cone. This precision windin...
	RW150 Air Jet Loom	Introduction of RW150 Air Jet Looms: RW150 Air Jet Looms are designed for high speed. The air jet weaving looms can weave high quality fabric with ...
	CONE WINDING MACHINE	Cone winder function and types Cone to cone winderis well designed for winding chemical filament yarns. Our company, Zhejiang Wanshifa Textile Mach...

Все товары поставщика

Похожие товары

	XD-MAX Winch for Drone	Продавец: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d...
	XD-55 Winch for Drone	Продавец: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng...
	XD-10 Winch for Drone	Продавец: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD	XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport...
	Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series	Продавец: Uratech USA Inc	TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m...
	Uratech Tool scoot cart for 50 taper tool holders	Продавец: Uratech USA Inc	Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so...