Fufu Machine

Features of Fufu ProcessingMachine

Fufu makingmachine for sale- Make Fufu(foofoo) from Fresh Cassava

Fufu Process Description and Flowchart:

How to make fufu with cassava flour

Fufu (variants of the name include foofoo, fufuo, foufou) is a staple food with deep roots in Ghana's history and common in many countries of West Africa and the Caribbean. It is often made with cassava flour. Other flours, such as semolina, maize flour or mashed plantains may take the place of cassava flour. Fufu served alongside soup, usually, groundnut soup is a national dish of Ghana.

Goodway focuses on providing solutions of fufu maker machineand cassava fufu processingproduction line since 1991.

Multiple distinct operations are required in fufu processing: washing, peeling, chipping, fermenting, grating, pressing, breaking & sifting, fufu drying, milling, and packaging.

We provide below a brief description of the main steps of the fufu production process.

Cleaning and Washing Cassava Roots

Wash the fresh cassava roots in clean water to remove the surface mud and sand. It's the first step of the fufu process and very important for the quality of final fufu(foofoo).

Peeling Cassava Roots

Peel the washed cassava roots to remove the outer brown skin and inner thick cream layer. The water source should be checked regularly to ensure it is not dirty or contaminated.

Cutting Cassava Roots into Cassava Chips

Cut the peeled cassava roots into chips by the high speed rotating circular cutter blade, then cut the chips into strips by the cross cutter blade.

Fermenting Cassava Chips or Strips on the Fermentation Rack:

Collect the cassava chips or strips into a clean polythene sack and tie, then bagged cassava chips or strips can be left in the fermentation rack for one or more days before grating, allow the milky water to drain freely from the bags.

Grating Fermented Cassava Chips into Mash

Load the grater with fermented cassava chips while the engine is running to grate peeled cassava chips into the mash. The grating drum and all food contact areas should be made from stainless steel.

De-watering Mash into Wet Cake

Load the bags directly on to a hydraulic press. Lift and press the jack handle up and down until it becomes hard to move. Repeat the process several times each day until no more water comes out of the bag to produce a firm wet cake.

Breaking Wet Cake and Sifting Wet Cake into Grits

Breaking the wet cake into small pieces (grits) and remove the lumps to obtain uniform size grits(wet coarse fufu). All food contact areas should be made from stainless steel

Drying Grits into Dried Coarse Fufu

Dry the grits(wet coarse fufu) into dried coarse fufu with low moisture content by the principle of heat transfer exchange.

Milling Coarse fufu into Fine fufu

Milling the dried coarse fufu into fine fufu with the uniform size, then pour the fufu into a plastic lining inside a woven polythene sack.

If you want to know fufu machine price, please contact us.

Другие товары поставщика

	Cassava Peeling Machine	Features of Cassava PeelingMachine Processing Capacity: 4-6Tons/hour Application Scope: Fresh cassava peeling and washing Product Introduction: Cas...
	Cassava Starch Extraction Machine	cassava machinecassava processing machinecassava starch extractionmachine Features of Cassava Starch Extraction Machine Processing Capacity: 15-...
	Centrifugal Dewatering Machine	Features of Centrifugal Dewatering Machine Processing Capacity: 1-10Tons/hour Application Scope: Cassava or potato starch dewatering Product Int...
	Centrifugal Dewatering Machine	Features of Centrifugal Dewatering Machine Processing Capacity: 1-10Tons/hour Application Scope: Cassava or potato starch dewatering Product Introd...
	Airflow Flash Dryer(Cassava Drying Machine)	Features of Airflow Flash Dryer(Cassava Drying Machine) The starch factory at present normally adopt airflow drying (also called flash dryingor fl...

Все товары поставщика

Похожие товары

	Китайская вальцовочная машина GT-DG250	Продавец: Чжаосин-гуретт технолоджис лимитед	• Описание Машина для вальцовки труб GT-DG250 использует пару вальцующих узлов, а также ряд ...
	Double Spindle Lathe NL251D	Продавец: Lecn Anhui Co., Ltd	A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ...
	Automobile Torsion Beam Milling Machine X8220125	Продавец: Lecn Anhui Co., Ltd	Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len...
	Joint Cross Machine CZ821030/TZ820510	Продавец: Lecn Anhui Co., Ltd	Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt...
	Break Cam Milling Machine CM0525	Продавец: Lecn Anhui Co., Ltd	can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams...