Medium Frequency Induction Heating Machine
If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate frequency induction heating equipment is your most correct choice.
Medium Frequency Induction Heating Machine Types
MFS-120A
1-8KHZ 120KW 182A
MFS-160A
1-8KHZ 160KW 250A
MFS-200A
1-8KHZ 200KW 310A
MFS-250A
1-8KHZ 250KW 380A
MFS-300A
1-8KHZ 300KW 460A
MFS-350A
1-8KHZ 350KW 530A
MFS-400A
1-8KHZ 400KW 610A
MFS-500A
1-8KHZ 500KW 760A
MFS-600A
1-8KHZ 600KW 910A
Advantages of Medium Frequency Induction Heating Machine
The induction heating speed is fast and the temperature uniform is good. The MFS series induction heating power supply can design the operating frequency according to the actual needs of customers. The workpiece is non-contact heating. The metal workpiece heats itself through the alternating eddy current, which has high efficiency and a good temperature uniform effect.
The induction heating energy efficiency is high. As a mature medium frequency induction heating series, the MFS series adopts IGBT and adjusts the power by adjusting the wave, and uses high-quality copper material as the main circuit base layer, which can effectively reduce the loss of the components and the circuit itself.
The design of this medium frequency induction heating machine can also allow customers to directly set the working status (power, working mode, etc.) of the heating equipment through the touch screen. At the same time, customers can also accept external PLC control through RS485 or reserved external signal I/O modules.
Standard MFS can be applied to wide voltage fluctuation (*360V~440V), and non-standard voltage power supply can also be customized according to the actual situation of customers.
This medium frequency induction furnaceis also equipped with a condition monitoring system(CMS) and a built-in condition detection system just like any other induction heating system launched by JKZ. Through the single-chip microcomputer, this medium frequencty induction heating deviceseries can effectively monitor the temperature, current, voltage, water flow, etc. of the main components of the equipment. Problems like overvoltage, undervoltage, overtemperature, water shortage, phase failure, and overcurrent can be easily detected.
With different output modules, MFS series china inductionheating power supplies can complete induction forging, induction quenching, and non-ferrous metal induction smelting.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Induction Hardening | The induction hardening process is a very important way in the manufacturing process of heat treatment of mechanical parts. In order to improve the... |
 |
High Frequency Induction Heating Machine | The working frequency of CX series high frequency induction heating equipmentcovers 50KHZ ~ 120KHZ. You can find the existence of this high-frequen... |
 |
Steel Melting | JKZcan provide you a complete induction heating machine chinaexperience service. Our service staff will give customers a full response immediately,... |
 |
Jkz888!!! | The frequency range of the MFS-500A 500KW IGBT type medium frequency generator is from 1KHZ to 10KHZ. Designed based on customers' actual billets s... |
 |
Induction Preheating | JKZcan provide you a complete induction heating machine chinaexperience service. Our service staff will give customers a full response immediately,... |
Похожие товары
 |
GT-FM24-PLC Разливочная машина (3+9+9+3) Тройная направляющая трубка | Продавец: Чжаосин-гуретт технолоджис лимитед | * Описание GT-FM-PLC (тройные направляющие трубки на станции 6-48)Машина для наполнения порошком ... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | Продавец: Eurion Automation Co., Ltd. | Система сервоконтроля высокой точности: использует платформу управления на основе промышленного к... |
 |
GT-FM18-PLC Разливочная машина (8+2+8) Тройная направляющая трубка | Продавец: Чжаосин-гуретт технолоджис лимитед | * Описание GT-FM-PLC (тройные направляющие трубки на станции 6-48)Машина для наполнения порошком ... |
 |
Разливочная машина на 48 станций GT-FM48 | Продавец: Чжаосин-гуретт технолоджис лимитед | * ОписаниеРазливочная машина FM подходит для наполнения трубчатых нагревателей большой длины и ра... |
 |
8-станционная разливочная машина GT-FM8 | Продавец: Чжаосин-гуретт технолоджис лимитед | * Описание Разливочная машина FM подходит для наполнения трубчатых нагревателей большой длины и р... |
