H-Beam Welding Line

• 

Hbeam machineconsists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyors. It is used to assemble the H-beam,180°turn-over and transmit, etc. The annual welding capacity is 8000 tons. The Max welding speed can reach about 2m/min.Regularly, we adopt Lincoln welding machine (DC-1000) and NA-5 control system.

JH-150A h beam weldingline for H-profile steel is a wonderful technical product that integrates mechanical, electric, and pneumatic technologies. The machine, using advanced technology of single-arc double-wire welding, greatly increases the production efficiency.

The half line and whole line of H-Beam Welding Line Machineare different. The whole production line includes the turnover device and a second welder and it's related roller conveyor, while the half production line doesn't include the above-mentioned parts.

H-beam welding line, which is developed by Zhejiang JinggongScience and Technology Co., Ltd., achieves the quality production of H-beam. It's the most advanced H-beam equipment domestically. H-beam welding line consists of the assembling machine, main welder, turnover device, and conveyor, etc.

Hbeam welding lineis very well received and widely applied by most steel structural enterprises for its high efficiency, big production scope, easy operation, and small space, etc.

Technical Parameter OfH-Beam Welding Line

Size Of Raw Materials Required For H-Beam Welding Line

Web height: 250-1500mm

Web thickness: 3-12mm

Flange width: 150-500mm

Flange thickness: 5-25mm

Length suitable workpiece: 2000～15000mm

Components of H-Beam Welding Line

Assembly Machine

The assembly machine is the first stage before entering the main welder. Before entering the main welder, the web plate and flange plate are to be assembled. By stop welding the two heads of the workpiece, H-beam assembling can be completed to go on the next stage.

Main Welding Machine

The main welding machine is the main equipment for this production line. After the assembled three plates are fed to the main welder through the conveyor, the welding process is started, and through positioning, clamping, and adjustment, until the whole process is completed.

Turnover Device

The turnover device is the assisting equipment of H-beam welding, one side welded H-beam will be transported to turn over device through the conveyor, and to turn over about 180 degrees, and to go on through conveyor to the main welder for welding the other side.

Compared with the traditional welding line, the H-beam welding line has the following seven advantages:

Jinggongis a professional roll forming machine company, we provide continuous sandwich panel line, china roll forming machine, flame cutting machine for sale, etc.

Другие товары поставщика

	Seamer	Our panel seameris the auxiliary equipment that is specially designed for overlapping and seaming panels for roll forming machine. It is easy to op...
	H Beam Shot Blasting Machine	H beam shot blasting machineis designed and manufactured to clean the surface of the section steel. It is ideally suited for removing the rust, sca...
	Auxiliary Equipment	Here is the different types of auxiliary equipment: curving punching forming machine, filming and cutting machine, slitter, uncoiler, stacker and s...
	H-Beam Straightening Machine	HBeam StraighteningMachine is mainly used for the angle distortion straightening of heavy H-beam, it adopts hydraulic straightening which will have...
	What are the Specifications of Foam Sandwich Panels and Rock Wool Sandwich Panels in the Sandwich Panel Machine?	What are the Specifications of Foam Sandwich Panels and Rock Wool Sandwich Panels in the Sandwich Panel Machine? What are the rockwool sandwich...

Похожие товары

	Китайская вальцовочная машина GT-DG250	Продавец: Чжаосин-гуретт технолоджис лимитед	• Описание Машина для вальцовки труб GT-DG250 использует пару вальцующих узлов, а также ряд ...
	Double Spindle Lathe NL251D	Продавец: Lecn Anhui Co., Ltd	A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ...
	Automobile Torsion Beam Milling Machine X8220125	Продавец: Lecn Anhui Co., Ltd	Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len...
	Joint Cross Machine CZ821030/TZ820510	Продавец: Lecn Anhui Co., Ltd	Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt...
	Break Cam Milling Machine CM0525	Продавец: Lecn Anhui Co., Ltd	can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams...