RPS-20M wireless cnc probe contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated p
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
|
TP200+RPDM： |
|
|
Measuring direction |
±X，±Y，+Z |
|
Arbitrary direction swinging angle |
X-Y±15°, Z +5 mm |
|
Repeatability （2σ） |
≤ 2 μm； |
|
Trigger force in Z direction |
600±30（g） |
|
Trigger force in X-Y direction |
50-100（g） |
|
Radio signal receiving/sending distance |
>14m |
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
Seal grade |
IP68 |
|
RSI-20M |
|
|
Radio signal receiving/sending distance |
>14m |
|
Frequency of the radio signal |
|
|
Quantity of the radio channel |
16 |
|
Input voltage |
24±10% VDC |
|
Output load current |
50mA |
|
Length of the cable |
8m |
|
Length of the cable retaining tube |
2m |
|
Seal grade |
IP68 |
Application of RPS-L11M Radio Probe System
RPS-L11 is for workpiece inspection and job set-up on multi-tasking machines and lathes.
PRS-L11 often used in turning machine to measure workpiece and set datum point.
It provide automated on-machine measurement of component position and alignment. Set up faster, improve quality and reduce scrap.
Technical Characteristics of RPS-L11M Radio Probe System
The stylus connector of TP200 probe is protected by a metal cover and a rubber seal cover;
Switch on/off method of RPD/RPDM radio signal emitter: M code on/off;
Radio code signals are used to transmit information between RPD/RPDM radio signal emitter and the receiver. The time to transmit and to decode a group of signals is less than 1ms;
Globally recognised 2.4 GHz waveband – compliant with radio regulations in all major markets.
The RSI-20 receiver out put trigger、error、probe batteries low and output pulse four kinds of signals. And it's logical state can change normally closed and normally open.
The indicating lights in RSI-20 and RPDM show the working status of the probe system
Pioneeris a professional probe factory, we provide touch probe, cnc measuring probe, lathe probe, pioneer probeand etc. Want to know more? Please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Machine Probe System in CNC Turning Machine | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
CNC Machine Tool Touch Probe Stylus | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
 |
RPS-20M Radio Probe System | RPS-20M wireless cnc probesystem contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle pro... |
 |
OPS-30 Optical CNC Probe System | OPS30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard mea... |
 |
Hebei Longsheng | Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradua... |
Похожие товары
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | Продавец: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | Продавец: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | Продавец: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | Продавец: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
