HORIZONTAL TURNING CENTER SPECIAL FOR WHEEL HUB
The machine tool bed adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC machine tool with better performance on accuracy maintenance and stability for a longer time. DEED CNC model HP800-WC is mainly used for turning to machine of 12-22inch passenger car wheel and truck bus wheel, also can be used for turning of similar disc parts.
FEATURES OF HORIZONTAL TURNING CENTER SPECIAL FOR WHEEL HUB
*Mineral casting rectangular hard rail bed has good seismic resistance, small thermal sensitivity coefficient, and good overall rigidity.
*Mineral casting spindle box has small vibration, high speed, and high efficiency, which is about 30% higher than the market average.
*According to the needs of the industry, specially ordered imported spindle units for machine tools.
*Automatic door structure, less time to open and close the door (within 2S).
*The chip conveyor is separated from the water tank, which makes cleaning and maintenance more convenient
*More reasonable internal layout and strong cooling of flushing chips to avoid chip accumulation without manual cleaning.
*The extreme ingenuity design brings a more convenient operation and clamping experience.
BENEFITS OF HORIZONTAL TURNING CENTER SPECIAL FOR WHEEL HUB
Mineral casting 45°slant bed. -The maximum length of embedded parts is 1750mm.
45 steel hardened with hardness HRC52 ~ 61.
During assembly, the accuracy of the linear guideway rail is less affected by temperature.
The bed is stable with minimal vibration.
The diameter of embedded parts reaches Φ 400mm.
Compared with iron casting HT300, mineral casting the vibration amplitude during machining is reduced by 20%.
For a 9.0x22.5 inch truck and bus wheel, rough and finish turning speed can be stable at 1000 pm.
Φ160 combined bearing. -High precision and rigidity.
Multi-wedge belt drive reduces the influence of the belt on high-speed rotation accuracy. -Multiple sealing structures to prolong service life.
HOW DOES HORIZONTAL TURNING CENTER SPECIAL FOR WHEEL HUB WORK?
CNC horizontal turning machining center adopts brake belt brake, which is mainly composed of brake wheel, brake belt, and lever. In the brake device, the brake wheel is a steel disc connected with the shaft by splines. A layer of steel mesh asbestos is fixed on the steel brake belt and the inner side to improve the friction coefficient. One end is linked with the spindle box, and the other end is fixed on the upper end of the lever. The brake belt of the horizontal lathe can be adjusted. The brake belt can be placed and adjusted by directly loosening the screw connecting the brake belt and the spindle box. When the CNC horizontal turning is adjusted properly, the brake belt can be released when the spindle rotates, but when the clutch is released and the horizontal lathe is stopped, the brake belt holds the brake wheel tightly, so as to realize the rapid stop of the spindle and achieve braking.
WHAT IS AN HORIZONTAL TURNING CENTER SPECIAL FOR WHEEL HUB USED FOR？
DEED CNC Horizontal Turning CenterHP800-WC for wheel machining application: Passenger car wheel, truck, and bus wheel machining first procedure, a second procedure, finish turning to the machine. After the coating of some passenger, wheels is completed, the "finish turning" process is required for side A (front). According to different processes, it can be divided into the following "finish turning": bright surface, super-bright surface, sub mirror surface, and mirror surface. The general criteria for evaluating the "finish turning" ability of wheel machining machine tools: clear and uniform lines, high finish, no light, and dark lines, no over cutting, etc.
HORIZONTAL TURNING CENTERSPECIAL FOR WHEEL HUB SPECIFICATION
HTC800/HTC900
|
Feed |
Maximum rotation diameter |
φ850 mm |
|
Maximum wheel diameter |
22" inch |
|
|
Maximum length wheel |
12" inch |
|
|
X axis travel |
-30~370mm |
|
|
Z axis travel |
850mm |
|
|
X/Z axis rapid traverse |
20/20 m/min |
|
|
Spindle |
Spindle max speed |
2500 rpm |
|
Spindle power |
30/37 kW |
|
|
Spindle torque |
375 N.m |
|
|
Spindle nose specification |
A2-8 |
|
|
Spindle neck |
φ160 mm |
|
|
ATC |
Tool quantity |
8 |
|
Inner diameter tool size |
φ50 mm |
|
|
Maximum outer diameter hilt size |
32*32 mm |
|
|
Adjacent tool change time |
||
|
Screw |
X-axis |
φ50*P10 mm |
|
Z-axis |
φ50*P10 mm |
|
|
Precision |
X-axis positioning |
|
|
Z-axis positioning |
||
|
X-axis repeatability |
||
|
Z-axis repeatability |
||
|
Others |
X/Z axis servo motor power |
4/4 kW |
|
X/Z axis servo motor torque |
22/22 N.m |
|
|
X/Z servo motor max speed |
3000 rpm |
|
|
Cooling water tank capacity |
600 L |
|
|
Machine size(not including chip conveyor) |
4169*2150*2147 mm |
|
|
Machine net weight |
11 T |
|
|
Control system |
FANUC 0i-TF |
As one of the cnc machining center manufacturers, we provide machining center in cnc, horizontal turning lathe, cnc machinery for saleand etc. For more information, please feel free to contact us!
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
UNIVERSAL HORIZONTAL LATHE | The machine tool adopts the mainstream oblique bed structure of Europe, America, and Japan, with integrated electromechanical, hydraulic, and gas d... |
 |
HBC SERIES CNC HORIZONTAL BORING MILL FOR SALE | HBC SERIES CNC HORIZONTAL BORING MILLFOR SALE HBC Series is our CNC horizontal boring machine. According to the different sizes, we have HBC1116... |
 |
Vertical Machining Center | China vertical machining center Our vmc machine typesmainly include VMC and VL two series, VMC series include VMC50B VMC milling machine, VMC50C V... |
 |
CNC Milling and Boring Machine | The maximal rotation of spindle can reach 2500rpm/min It can meet the large-torque requirement during the rough machiningand the high rotational... |
 |
HBC SERIES CNC HORIZONTAL BORING AND MILLING CENTER FOR SALE | HBC Series is our CNC horizontal boring and milling machine. According to the different sizes, we have HBC1116 CNC boring machine and HBC1316 CNC h... |
Похожие товары
 |
Китайская вальцовочная машина GT-DG250 | Продавец: Чжаосин-гуретт технолоджис лимитед | • Описание Машина для вальцовки труб GT-DG250 использует пару вальцующих узлов, а также ряд ... |
 |
Double Spindle Lathe NL251D | Продавец: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | Продавец: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | Продавец: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | Продавец: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
