PLASTIC DRYER BY SOXI: ALWAYS THE RIGHT CHOICE

• 

Soxi is one of the top plastic material dryermanufacturers, our plastic dryermachine will avoid the following questions. In the plastic auxiliary machine, the plastic in the resin state easily absorbs moisture from the air. In another word, the moisture absorbed during storage and before processing will seriously lower the quality of final molded products,e.g. nylon, ABS, polycarbonate, etc. Even if the non-bibulous plastic, is sensitive to moisture pollution(moisture accumulates at the surface of plastic granules), therefore, proper plastic pellet dryerdehumidifying treatment before processing for plastic is required to ensure the best molding effect of the plastic dryer machine. Before moulding, plastic must be dried by injection molding dryerto the moisture content of below 0.02%. Many problems will be caused by improper dryings, such as bubble, flow mark, hydrolysis, product crazing, poor impact, silver thread, galling, unstable size, and poor viscidity.

Types Of Plastic Scrap Dryer Machine

SOXI plastic dryers are built to solve those problems. The plastic drying machineadopts a multi-section honeycomb wheel and stainless steel double-layer down blowing thermal insulation hopper, which integrates three dehumidifying, drying, and feeding machines, and has the advantages of fast, simple, compact, and durable material supply with the widespread use of engineering plastics, Dehumidifying dryer has gradually replaced the traditional hot air dryer.

Product in this category includes a Three-in-one dehumidification dryer, honeycomb dehumidifier,three-in-one honeycomb dehumidifier, optical small-scale desiccant dryer, Europeanization double-layer dryer,two-in-one loading and drying machine, hot air hopper dryer. The three-in-one dehumidifying dryer is a new product developed according to the actual situation of the plastic industry.

When the air has reached the dew-point temperature at a particular pressure, the water vapor in the air is in equilibrium with liquid water, meaning water vapor is condensing at the same rate at which liquid water is evaporating. Below the dew point, liquid water will begin to condense on solid surfaces (such as blades of grass) or around solid particles in the atmosphere (such as dust or salt), forming clouds or fog.

Dew point is closely linked to relative humidity, which is the ratio of the pressure of water vapor in a parcel of air relative to the saturation pressure of water vapor in that same parcel of air at a specific temperature. Relative humidity (RH) is expressed as a percentage. The relative humidity is 100 percent when the dew point and the temperature are the same. If the temperature drops any further, condensation will result, and liquid water will begin to form. Compared to relative humidity, the dew point is frequently cited as a more accurate way of measuring the humidity and comfort of the air, since it is an absolute measurement (unlike relative humidity). Most people are comfortable with a dew-point temperature of 60 degrees Fahrenheit (16 degrees Celsius) or lower. At a higher dew point of, for example, 70 F (21 C), most people feel hot or "sticky" because the amount of water vapor in the air slows the evaporation of perspiration and keeps the body from cooling.

The dew–point temperature ordinary dehumidification dryer can reach is -30℃, as the dew-point temperature of dehumidification dryer is all minus value, it means the dew-point temperature is very low.

The new type of multi-stage honeycomb dehumidifying drier takes use of the large area rotary wheel containing a fixed absorbent or absorption material for air dehumidification. It can provide the dried air at dew point below -40℃--70℃. The excellent airproof condition and circular operation of the rotary wheel ensure the final moisture content of plastic is lower than 0.02%. the various types of machines with the air volume ranging 60-2000m³/h can meet different demands on drying capacity.

As one of plastic machine manufacturers, we can offer kinds of related products for sale, if you have needs, please contact us.

Другие товары поставщика

	EXTRUSION TECHNOLOGY (EXT)	Soxi is synonymous with reliable and sustainable extrusion technology solutions worldwide. Areas of application include venting and compounding in ...
	PLASTIC MACHINERY PARTS BY SOXI: ALWAYS THE RIGHT CHOICE	Plastic machinery parts, to put it more precisely, are parts for plastic auxiliary equipment and central loading system. The machinery and system n...
	MOLD TEMPERATURE MACHINE CONTROLLER BY SOXI: ALWAYS THE RIGHT CHOICE	Mold temperature machine, MTC, mold heater, In a broad sense, called mold temperature controller, oil/water mold heaters. Mold temp controller cont...
	SOXI PLASTIC MOLDING MACHINE MANUFACTURERS	Are you in the market for a new plastic moulding machine but just not sure how or where to start? Soxi can be your competitive plastic molding mach...
	HOT AIR DRYER	The hot air dryer for plastic can be directly installed on the injection molding machine. Hot air enters evenly from bottom to top to ensure a good...

Похожие товары

	Sling webbings automatic cutting and winding machine	Продавец: 864244	Sling webbings automatic cutting and winding machine New Type sling webbings automatic cutting a...
	label ribbons calender machine	Продавец: 864244	label ribbons calender machine Item No：KW-900-W300 This is a kind oflabel ribbons calender ma...
	Automatic elastic tapes/laces silicone coating machines	Продавец: 864244	Automatic elastic tapes/laces silicone coating machines Item No.: Kw-200 This is a kind of auto...
	elastic tapes pre-shrinking machine	Продавец: 864244	elastic tapes pre-shrinking machine Item No：KW-210 This is anelastic tapes pre-shrinking machin...
	Starching And Finishing Machine	Продавец: 864244	Starching And Finishing Machine Item No:KW-710A Application:this machine is widely used for thi...