G234 Bed Blanket Flammability Tester

• 

The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface. The test method is to burn the surface of the specimen with a standardized flame for a specified period of time. Thus, the burning, damage degree and color change of standard test paper are observed and then assess the test fabric grade.

Structure

Flowmeter :Adjust the gas flow size.

Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe

Windscreen: the upper part of the windshield is provided with glass

The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.

Control panel :Power- power switch ;Start：Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;

Reset :Timer reset /Fire tube reset.

Sample clamp and specimen holder :The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob.

Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward.

Standards

ASTM D4151 Standard Test Method for Flammability of Blankets

Operation

●After the sample is ready and the instrument is commissioned, place the assembled sample clamp on the specimen holder.

●Open the gas valve and supply the gas to the fire pipe. Use the electronic igniter to fire the burner

●Press the start button on the control panel. The fire tube moves forward and moved to the test position under the action of the mechanical transmission. Then, Start the ignition of the sample and test paper on the sample holder

●At the same time to start the ignition timing system, the control panel display and record the ignition time. After a second, the fire tube moving backwards, the timer stop time. The experiment is end.

●Finally remove the sample and test paper for rating.

Features

◆Stainless steel case with transparent viewing window

◆18 Needle flame, flame length adjustable

◆Ignition time can be set freely

◆Provide bristles and sample clamps

◆Provide standard stainless steel sample holder

Technical Parameters

Другие товары поставщика

	oxygen index apparatus	The oxygen index flammability testeris, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use tog...
	Sliding Bearing Fatigue Testing Machine	Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re...
	Flame retardant paper and board burning tester	Introduction： The Flame Retardant Paper and Board Burning Tester is a critical instrument for evaluating the fire safety of paper and cardboard ma...
	Taber Abrasion Resistance Tester	Standards ISO Standards: ISO 9352, ISO 5470, ISO 7784 ASTM Standards: ASTM D1044, ASTM D3884, ASTM D4060 Chinese Standards: GB/T 5137.1, QB/T ...
	Helmets Designated Protection Areas Tester	Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t...

Похожие товары

	robotic friction stir welding	Продавец: World Wide Welding	robotic friction stir welding ROBOTIC FRICTION STIR WELDING Robotic Friction Stir Welding...
	friction stir welding tool	Продавец: World Wide Welding	friction stir welding tool FRICTION STIR WELDING (FSW) TOOLS Friction stir welding tool i...
	fsw welded parts supplier	Продавец: World Wide Welding	fsw welded parts supplier FRICTION STIR WELDING(FSW) PRODUCTS FSW Welded Parts are compon...
	AI Empowered Embroidery Software	Продавец: Zhejiang Maya Mechanical & Electrical Technology Co., Ltd.	AI Empowered Embroidery Software What is ? is a revolutionary image-to-embroidery convers...
	Textile Thermal Insulation Property Tester	Продавец: Standard International Group (HK) Limited	Standard GB/T 41560-2022 (China): Specifies thermal resistance testing protocols for protective ...