Shock Absorber Base Valve
Shock absorber base valve is made by powder pressing and sintering (Powder Metallurgy) technology, then do black steam oxidation as per surface treatment.Technical information:1. Material: MPIF 35 FC - 0205 Equivalent material: DIN 30910 - Sint C102. Chemical compositionDesignationFeCuCFC - 0205Balance1.5-3.9%0.3-0.6% 3. Hardness range: HRB 40 – 100 Before black oxidation (around 50 HRB) After black oxidation (around 85 HRB) 4. Density range: 6.3-6.9 g/cm³ 5. Possible tolerance for ID: 0.03 mm, for OD: 0.05 mm6. General tolerance: ISO 2768 – m7. Degree of oxidation: 2-5%, thickness 0.003-0.005 mm Fe3O4 CodeTypeD1D2D3D4D5D6D7D8NH1H2H3H4H5H6H7hA1D01D02D03D04D05D06D07D08DW466BV.56133.5860.0330DW342BV13530..34.3430DW566BV127.523.8181922209.54.52.22DW461-1BV227.425620.81825.41311.544.41.80.2269.11617.99.714.517.92123DW463BV232.7306272128.52612.53.55.42.50.4209.51820.51118.520.525.528DW036-1BV23532525..24.80.03308.518.219.418.82026.527.7DW600BV23330524.520.2262411.83.3540.05SR38.591819.291718.22627.2DW628BV.5211.83.3540.05SR38.58.514.516.58.514.516.520.722.2DW084-1BV.23.575.2307.515.316.515.716.924.425.6DW083-13BV.62.13113740.08SR38.57.515.316.515.216.322.423.6DW098-2BV22825620.51824.51.83113.85.530.03308.515.71715.71721.422.6DW028-3BV.837.34.50.0330715.316.315.416.422.823.8Packing of shock absorber base valve:1. Rolled by anti-rust kraft paper, 5 or 10 pcs per roller / Plastic blister packing2. Neutral standard carton or to your choice3. Wooden boxes or palletsProcess flow of shock absorber base valve:Powder mixing – Pressing – Sintering – Sizing – Ultrasonic cleaning – Steam oxidation – Oil impregnation – Final inspection – Packing – Storage Quality control of shock absorber base valve:Work instruction paper and pictures at each working positionProcess flow card with each tray (Fully traceability)Sampling inspection and routing inspectionTS:16949 5 tools: PPAP, APQP, FMEA, SPC, MSADimensional report as per your requirement by CMM, projector, etc
Другие товары поставщика
|
|
|
Shock absorber rod guide is made by powder pressing and sintering (Powder Metallurgy) technology.Some types will be inserted red PTFE DP4 sliding b... |
|
|
|
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coin... |
|
|
|
The gerotor is used for gerotor pump,Website:, postive displacement pump, also named gear pump, internal gear pump. It consists of the inner rotor ... |
|
|
|
Shock absorber piston is made by powder pressing and sintering (Powder Metallurgy) technology.We will do the black steam oxidation and cover the ou... |
|
|
|
Brief introduction of oil pump vaneOil pump vane is made of bearing steel Gcr15(AISI 52100), we cut the steel sheet to little plates by laser. Then... |
Все товары поставщика
Похожие товары
