SRS Supplemental Restraint System
SRS supplemental restraint systemconsists of an airbag and an inflating mechanism to form an integral airbag module, a collision supplemental restraint systemthat senses collisions and sends deployment commands to the airbag module, and a wire harness that transmits signals from the airbag sensor. This supplementary restraint systemfrom MAPMS has features of good collision recognition performance, collision energy absorption performance is highly matched to reduce injuries to drivers and passengers, also a prominent warning sign to avoid unnecessary false deployment of the airbag. We also manufacture custom airbag clock spring for your selections.
How Does The SRS Supplemental Restraint System Work?
During the driving process, the srs supplemental restraint system continuously sends speed change information to the control device, and the control device analyzes and judges the information. When the measured acceleration, speed change or other indicators exceed the predetermined value, the supplementary restraint systems sends an ignition command to the gas generator. An explosion reaction occurs, and a large amount of gas is released to fill the collision air bag, and the upper vent hole damps and absorbs the collision energy to protect the occupants. The supplementary restraint systems is a passive safety protection system that works with seat belts to provide occupants with effective crash protection.
SRS Supplemental Restraint System Introductions
The supplemental restraint system consists of collision sensor system, airbag module and wiring harness system. When the collision sensor detects the collision, the relevant supplementary restraint systems will judge the degree of the collision and decide whether to trigger the inflatable device, which usually consists of a gas generating agent and an ignition device to form an inflatable module. For the safety of disposal, the airbag is usually detonated only at high temperature. Because the impact process time of car auto spares is very short, the airbag general takes about 25-35 milliseconds from the trigger to the completion of the inflation process and inflating for too long will lose its effectiveness.
If you need any kinds of auto spares, please contact us, as a professional auto spares suppliers, MAPMS is willing to offer you high quality products.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Airbag Sensor | The airbag sensor is the input device of control signal in the SRS system. When the vehicle happens to collides, the airbag sensor detects the inte... |
 |
Starting System in Automobile | Starting System in Automobile Therefore, the whole process from when the crankshaft starts to rotate under the action of external force to when the... |
 |
Neutral Safety Switches | The neutral safety switch relay is one of the vehicle safety switches to prevent accidents, which plays a role in safety protection. When the vehic... |
 |
Dimmer Switches | The car headlight switchare basically integrated on the lever switch on the left side of the steering wheel, but also there are exceptions. The hea... |
 |
Vehicle Speed Sensors | As the information source of the automotive electronic control system, the vehicle speed sensor is the key component of the automotive electronic c... |
Похожие товары
 |
Injection Pump Delivery Valves K49 | Продавец: 828487 | Injection Pump Delivery Valves K49 China lutong is a manufacturer specialist in diesel engine ... |
 |
Injection Pump Delivery Valves K34 | Продавец: 828487 | Injection Pump Delivery Valves K34 China lutong is a manufacturer specialist in diesel engine pa... |
 |
Injection Pump Delivery Valves K28 | Продавец: 828487 | Injection Pump Delivery Valves K28 China lutong is a manufacturer specialist in diesel engine ... |
 |
Common Rail Injector Valve F00R J01 704 | Продавец: 868983 | Common Rail Injector Valve F00R J01 704 David Chen |
 |
Common Rail Injector Valve F00R J01 692 | Продавец: 868983 | Common Rail Injector Valve F00R J01 692 David Chen |
