KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM

KRD17 series is a new designed fully automatic pneumatic lifting bidirectional shock test system with high degree of automation, simple operation and convenient maintenance. It is a bidirectional vertical shock test system developed for measuring and determining the impact resistance of large specimens without turning over them, and assesses the functional reliability and structural integrity of the specimens. It is especially used in the field of battery testing, can perform various conventional classic vertical upward and downward shock tests in one test table to realize the shock wave and impact energy suffered by the product in the actual environment. This equipment meets standards of IEC68-2-27, MIL-STD-202, MIL-STD-750, MIL-STD-810, MIL-STD-883, UN38.3 and other battery testing standards.

FEATURES OF KRD17 BIDIRECTIONAL VERTICAL mechanical shock machine

Circulating storage cylinder: strong impact, fast speed, and low air consumption

Adopt full pneumatic drive: simple structure, high reliability, no pollution

Bidirectional shock test: effectively complete the upward and downward shock tests without turning over UUT

Multiple functions: to complete the bidirectional shock and bump tests by one clamping, with high efficiency

High degree of automation: After the height setting is completed, the software automatically lifts the working table to the set height, with high accuracy and good repeatability

Multi-track guide pillar: combined with pneumatic balance lifting system, no noise, fully automatic positioning table

Built-in pneumatic brake mechanism, safe and reliable

High-performance buffer and vibration isolation device, no special foundation is needed, and it is easy to install

TECHNICAL SPECIFICATIONS OF KRD17 BIDIRECTIONAL VERTICAL mechanical shock testSYSTEM

TABLE OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM

This bidirectional shock test table is composed of a circulating air storage cylinder, a pneumatic self-locking control mechanism up and down each, a forward impact plate, a reverse impact plate, a locking mechanism, a base, and other parts.

The circulating accumulator is used as the shock power cylinder. The pneumatic brake device locks the table at the set position. The circulating accumulator is inflated. After the air pressure reaches the set value, the locking device is controlled to release, and the circulating storage cylinder drives the table to accelerate upward and downward movement, and impacts the waveform generator on the impact plate to produce the required shock waveform.

Come and buy testing equipment.

DUAL MASS SHOCK AMPLIFIER OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM

The shock amplifier is a device that uses the rebound energy of the ordinary impact shock table to realize the opposite impact between the servo table and the seat on the amplifier so that the impact acceleration is multiplied.

DUAL MASS SHOCK AMPLIFIER OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM

WAVE GENERATORS OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM

KRD17 series bidirectional shock test system is equipped with a half-sine wave generator. The half-sine wave generator is mainly made of engineering rubber (considering the stiffness and cohesive force of rubber) and felt pads of various thicknesses. Different thicknesses are connected in series to form multiple stiffnesses to achieve different shock pulse widths. Optional for post-peak sawtooth wave generator which is lead cone; trapezoidal wave generator air source is high-pressure nitrogen, the pressure range is 1-10MPa, and the overload value can be adjusted between 10-100g, as shown in the following figure:

Другие товары поставщика

	KRD61 6-DOF Test Table	KRD61 series 6 DOF testtable is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide...
	KRD10 Hydraulic Vertical Shock Test System	KRD10 Hydraulic Vertical Shock Test System KRD10series is a full-automatic hydraulic lifting vertical shock testing machine, with the state-of-the...
	KRD32 NON-STANDARD CONSTANT ACCELERATION TESTER	KRD32 series non-standard constant centrifuge acceleration testingmachineis a box-type test machine for electronic components, small components, an...
	KRD11 Pneumatic Vertical Shock Test Machine	KRD11 is a fully automatic pneumatic lifting vertical shock test machine. It is vertical shock test equipment mechanicalwith a novel design, high d...
	KRD102 Clamping Force Tester	KRD102 series clamping force testeris newly developed multi-functional economical carton quality inspection equipment, mainly used for household ap...

Все товары поставщика

Похожие товары

	CNC Machining Material	Продавец: YS RAPID MANUFACTURING LIMITED	China CNC Machining Factory--Custom Metal CNC Parts, Plastic CNC Parts, Sheet Metal Fabrication M...
	CNC Machining Copper	Продавец: YS RAPID MANUFACTURING LIMITED	With extensive production experience, YS Rapid offers copper cnc machining service and copper mac...
	CNC Machining Brass	Продавец: YS RAPID MANUFACTURING LIMITED	Brass is an object made of an alloy of copper and zinc. The melting point of brass with a copper ...
	CNC Machining Aluminum	Продавец: YS RAPID MANUFACTURING LIMITED	We produce almost any form of product for our customers. Our company provides aluminium cnc machi...
	CNC Machining ABS	Продавец: YS RAPID MANUFACTURING LIMITED	Machining ABS material is an abbreviation for acrylonitrile-butadiene-styrene copolymer board, an...