For Large And Medium-sized Casting Sand Mold Stamping Sand Rammer
D9 Sand rammer applying：1、It is working capacity is comparatively large and is used for tamping large and Middle sand mould castings.2、It can also be used for roding concrete and tile mills and for smashing and making adobes or repairing furnace liners,Website:, etc in construction.3、sand rammer driven by compressed air as one of the mechanized hand tools, used in stamping of medium-sized casting sand mold, can also be used in the concrete and bricks etctechnical data： Overall length：1140mm Weight：9.5kg Piston diameter: 32mm Impact frequency：≥10Hz Air consumption：≤15L/S Hose size：Φ13mm Piston stroke：120mm It is used our pressure：0.63Mpa
Другие товары поставщика
|
|
|
C6A Chipping hammerapplying： 1、Used for shoveling and cutting welding seam in infrastructure and traffic engineering. 2、Ningbo yongdun brand seri... |
|
|
|
CZ2 Chipping hammerapplying： 1、Used for grooving before welding and clearing spatter after welding and leveling up burr. technical data：... |
|
|
|
SJ125×110°Air angle grinderapplying： 1、 It is Just cutting cut. For small air Angle grinder technical data： Max Grinder Size :125mm Free Speed :... |
|
|
|
S40 -580 Air grinderapplying：S40-580 type pneumatic grinder is suitable for grinding flat gate and riser,Website:, small and medium sized castings ... |
|
|
|
G12 Pneumatic hammerapplying： 1、Used in repairing shaft and breaking old road surface in municipal construction and destroying the former concre... |
Все товары поставщика
Похожие товары
