FEP Extrusion Grade
FEP Extrusion GradeFEP is the copolymer of tetrafluoroethylene(TFE) and hexafluoropropylene(HFP). It has excellent thermo-stability, outstanding chemical inertness, low friction coefficient, distinctive air aging resistance, vapor penetrating resistance, non-inflammability and superior electrical insulation.FEP extrusion grade is mainly used in extruding insulation layers and jackets for conducting wire and cable. It’s also widely used in the production of pipe, tube, film and etc.Package, storage and transportationFEP resin is sealed in plastic bag with 25kg net weight per bag, and then packed in drum or big cardboard box. It should be stored in clean and dry warehouses to avoid pollution from impurities. The processing temperature should be below 400 ℃ to avoid releasing toxic gases.
Items FEP Extrusion Grade FT-1FT-2FT-3FT-401FT-402FT-501FT-502AppearanceClean semitransparent pelletMelt flow rate（g/10min）2.1-4.04.1-8.08.1-12.012.1-16.016.1-20.020.1-24.024.1-27.0Tensile strength（MPa）≥Elongation at Break（%）≥Melting point（℃）265±10265±10265±10265±10265±10265±10265±10S.S.G2.12-2.17Volatile（%）≤0.10Thermo-stress craze resistanceVery goodVery goodgoodgoodgood goodgoodBreaking down Voltage（KV/mm）3.0×10-44.0×10-4ApplicationThick wire jacket, valve etc.Wire and cable for general purpose, pipe, tube etc.High Speed Extrusion. Thin wire and cable, tube etc.
Другие товары поставщика
|
|
Хладон 152a (Фреон r152a) Китай |
R152aR152a is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself, easily solube in oil b... |
|
|
|
PVDF Li-battery Grade FTH-223CharacteristicPropertiesSpecificationASTM Test standardAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.74... |
|
|
|
R404AR404A is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself,mixed by R125, R134a an... |
|
|
|
HFC-245fa is a hydrocarbon used primarily for closed-cell spray foam insulation, also known as pentafluoropropane. Unlike CFC and HCFC blowing agen... |
|
|
|
R143a or simply trifluoroethane, is a fluorocarbon compound that is a clear, colorless gas. It is used as a refrigerant either by itself or more co... |
Все товары поставщика
Похожие товары
