Blower Heater Purge Type
BHP Series – BLOWER HEATER PURGE TYPERegeneration is evaporation by heatingMoisture is evaporated from absorbents in saturation by hot air that was heated by electric heater absorbing after the suction of outer air by blower.Minimization of exhaust amount of regeneration airLittle purge air loss is generated because of regeneration by ambient air PURGE AIR LOSS~4%.There is regenerated air consumptionExhaust of regenerated air in approx,Website:, 4% even if it is Regenerated using outer air.Outlet Dew Point -100°CGuaranteeing absolute pressure dew point from -40°C-100°C according to the site requirement condition.
Другие товары поставщика
|
|
|
Dew point drop using freezing cycleRCI type declines the temperature of compressed air by exchanging heat between chiller that was exchanged in hea... |
|
|
|
Regeneration is the difference of moisture amountPSH type uses the difference of moisture amount between compressed air and adsorbents.Fixed outlet... |
|
|
|
Filter-Pre FilterIt filters out moisture, particles and substances from after cooler and/ or separator to prevent contamination of desiccant.-After... |
|
|
|
Lanxing air cooled all-aluminum brazed bar and plate heat exchangers are supplied as a vital component to our mobile and industrial OEMs' products.... |
|
|
|
Product Description：Petrochemical pressure vessel can be divided into low-pressure vessel, mid-pressure vessel, high-pressure vessel; By medium, it... |
Все товары поставщика
Похожие товары
