Tricresyl phosphate (TCP) CAS 1330-78-5
1330-78-5 – Names and Identifiers
| Name | Tricresyl phosphate |
| Synonyms | TCP Kronitex TCP Disflamol TKP Phosflex Lindol Tritolyl phosphate Tricresyl phosphat Tricresyl phosphate Tritolyl Phosphate, Technical tris(4-methylphenyl) phosphate 3,5,6-trichloropyridin-2(1H)-one Tris(hydroxymethylbenzol)phosphate (containing o-isomers Phosphoric Acid Tritolyl EsterPhosphoric Acid Tricresyl EsterTritolyl Phosphate |
| CAS | 1330-78-5 |
| EINECS | 215-548-8 |
| InChI | InChI=1/3C21H21O4P/c,;,;,/h3*4-15H,1-3H3 |
| InChIKey | ISNNXHQBIBWQHG-UHFFFAOYSA-N |
1330-78-5 – Physico-chemical Properties
| Molecular Formula | C21H21O4P |
| Molar Mass | 368.36 |
| Density | 1.143 g/mL at 25 °C(lit.) |
| Boling Point | 265°C10mm Hg(lit.) |
| Flash Point | >230°F |
| Water Solubility | INSOLUBLE |
| Solubility | organic solvents: miscible(lit.) |
| Vapor Presure | 0.03 mm Hg ( 25 °C) |
| Appearance | Powder |
| Color | White to off-white |
| Merck | 14,9763 |
| Storage Condition | Store below +30°C. |
| Stability | Stable. Incompatible with strong oxidizing agents. May soften some plastics. Hydrolyzes slowly under alkaline conditions. |
| Refractive Index | n20/D 1.555(lit.) |
| Physical and Chemical Properties | Density 1.143 boiling point 265 ° C (10 mmHg) refractive index 1.555-1.557 flash point> 110°C water-soluble INSOLUBLE |
| Use | Used as plasticizer for polyvinyl chloride and triacetate fiber (film base) |
1330-78-5 – Risk and Safety
| Risk Codes | R21/22 – Harmful in contact with skin and if swallowed. R51/53 – Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R39/23/24/25 – R62 – Possible risk of impaired fertility R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S28 – After contact with skin, wash immediately with plenty of soap-suds. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S28A – S20/21 – S60 – This material and its container must be disposed of as hazardous waste. S36/37 – Wear suitable protective clothing and gloves. |
| UN IDs | UN 2574 6.1/PG 2 |
| WGK Germany | 2 |
| RTECS | TD0175000 |
| TSCA | Yes |
| HS Code | 2919 90 00 |
| Hazard Class | 6.1 |
| Packing Group | II |
1330-78-5 – Upstream Downstream Industry
| Raw Materials | Dimethylphenol Chlorine Phosphorus oxychloride |
1330-78-5 – Reference Information
| LogP | 5.93 |
| EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
| properties | tricresyl phosphate is colorless to light yellow transparent oily liquid, odorless, slightly fluorescent, stable in nature, non-volatile and flame retardant. |
| application | tricresyl phosphate is a standard flame retardant plasticizer for synthetic rubber, polyester and polyvinyl chloride, which can give polymers good wear resistance, weather resistance, mildew resistance, radiation resistance and electrical properties. it can also be used as gasoline additive, lubricating oil additive and hydraulic oil. |
| use | used as analytical reagent, solvent and plasticizer for nitrocellulose used as plasticizer for polyvinyl chloride and triacetate fiber (film film base) etc used as plasticizer for epoxy resin adhesive, with flame retardant properties. used as gas chromatography stationary liquid (the maximum service temperature is 125 ℃, the solvent is ether), separation and analysis of aromatic hydrocarbons, phenolic isomers, halides, mercaptans, etc. |
| category | toxic substances |
| toxicity classification | poisoning |
| acute toxicity | oral-rat LD50: 5190 mg/kg; Oral-mouse LD50: 3900 mg/kg |
| stimulation data | skin-rabbit 500 mg mild; Eye-rabbit 500 mg/24 hours mild |
| flammability hazard characteristics | flammable in case of open flame and high heat; toxic phosphorus oxide gas is released during combustion |
| storage and transportation characteristics | warehouse ventilation and low temperature drying; Store separately from oxidants and food additives |
| fire extinguishing agent | water, foam, sand, carbon dioxide |
| occupational standard | TLV-TWA 0.1 mg/m3 |
| auto-ignition temperature | 770 °F |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Dispersants STD-5041 | Introduction Composition: Copolymer solution containing pigment-friendly groups Appearance: brownish yellow transparent solution Active ingredie... |
 |
IPPD (4010NA) CAS 101-72-4 | 101-72-4 –Names and Identifiers Name N-isopropyl-N’-phenyl-p-phenylenediamine Synonyms 4010na4010 NAAntigen 3cBHTOX-4010N... |
 |
CAS 4415-87-6 | Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1... |
 |
polyester poly （MT670 BAC） | Introduction Use: Binder for coating materials Relevant identified uses of the substance or mixture and uses advised against Type of prod... |
 |
Leather coloring | Introduction The series liquid colorant products are used in the leather industry for coloring, with strong coloring power, bright and transparent... |
Похожие товары
 |
Core Drill Bits For Stone | Продавец: Hebei XMF Tools Group Co., Ltd | Our Core Drill Bits for Stoneare designed for professional cutting and drilling of granite, marbl... |
 |
Uphone L181 4G Rugged PoC Radio Entry Level IP68 | Продавец: Shenzhen Tianlong Century Technology Development CO., LTD | Uphone L181 4G Rugged PoC Radio Entry Level IP68 Uphone L181 4G Rugged PoC Radio – Entry-L... |
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
