Colorless transparent liquid STD-8833
Basic Information
Colorless Transparent Liquid 8833 is a high - performance material widely used in various industrial applications due to its unique properties.
Chemical Properties
| Property | Value |
|---|
| Appearance |
Clear to pale yellow liquid |
| Flash Point |
<21℃ (68.9℉) |
| Viscosity |
50-200 mPa·s @20℃ (68℉) |
| Specific Gravity |
0.995-1.005 g/cm³ |
| Resin Content |
100% |
Application Matrix
| Application | Description |
|---|
| Coatings |
Used for protective and decorative coatings |
| Adhesives |
Provides strong bonding for various materials |
| Pre - ceramic polymers |
Acts as a precursor for ceramic materials |
| Polymer Matrix Composites (PMC) |
Enhances the properties of composite materials |
| Non - flammable composites |
Offers flame - retardant properties |
| Organic/Inorganic hybrids |
Combines the benefits of both organic and inorganic materials |
| Casting elastomers |
Used for casting flexible and elastic parts |
| Rigid castings |
Suitable for creating rigid and durable components |
Curing Performance Pre - Curing Properties
| Property | Value |
|---|
| Appearance |
Colorless transparent liquid |
| Post - Cure Density |
1.6 - 2.0 g/cm³ |
| Viscosity @20℃ |
50 - 200 cPs |
| Film Thickness |
0.5 - 20 μm |
Curing Methods
| Method | Time |
|---|
| 23℃/50% RH |
1 - 3 days |
| 100℃ |
2 hours |
| 200 - 300℃ |
10 - 30 minutes |
Curing Behavior
Performance depends on ambient temperature/humidity.
| Film Thickness (μm) | Application | Tack - Free (min) | Hardness (ASTM D3363) | Adhesion (ASTM D3359) |
|---|
| 7 - 15 |
Troweling |
25 - 30 |
6H |
5B |
| 25 - 35 |
Brushing |
25 - 30 |
7H |
5B |
| 24 - 37 |
Spraying |
25 - 30 |
7H |
5B |
Post - Curing Properties (30℃/55% RH on Q - panel steel)
| Property | Result |
|---|
| Tinplate Adhesion |
5B |
| Wafer Adhesion |
5B |
| Stainless Steel Adhesion |
5B |
| Aluminum Alloy Adhesion |
5B |
| Glass Adhesion |
5B |
| Ceramic Adhesion |
5B |
| Pencil Hardness |
5 - 7H |
| High - Temp Resistance |
800℃ |
| Salt Spray Resistance |
2.400hrs passed |
| QUV Aging |
3.000hrs passed |
Mechanical Properties
| Property | Value |
|---|
| Tensile Strength |
20 - 30 MPa |
| Elongation at Break |
10 - 20% |
| Flexural Modulus |
1.500 - 2.000 MPa |
| Impact Resistance |
2 - 3 kJ/m² |
Environmental Resistance
| Property | Value |
|---|
| UV Resistance |
3.000 hours exposure without significant degradation |
| Chemical Resistance |
Resistant to common solvents and acids |
| Water Resistance |
Immersion in water for 1.000 hours without significant change |
Другие товары поставщика
|
|
Molten Metal Penetration Resistance Tester |
Standard
ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash)
ASTM F955(Standard Test Method for Evaluating Heat Tra... |
|
|
Shoe Sole Bending Tester |
Applications：
TheFootwear Flection Testeris designed to assess the flexing endurance of overall footwear in wet and dry conditions.
Product i... |
|
|
Cupping Tester |
Meet the standard:
ISO 1520
ASTM E643 EN
ISO 1520
DIN 50101
DIN 50102
Product Introduction:
The cupping test provides valuable information... |
|
|
G612 national standard shoe wear testing machine |
Product Introduction:
The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
|
|
Face Mask Tensile Tester |
Introduction:
The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
Все товары поставщика
Похожие товары
