Water-dispersible isocyanate curing agent STD 268
Product Description
STD268 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesive. After addition of STD268, the ready-to-use mixture must be used within the pot life.
STD268 can be diluted with the solvents, such as propylene glycol methyl ether acetate (PMA), propylene glycol diacetate (PGDA), butyl acetate, etc. Only PU grade solvents (< 0.05% water) should be used and the solvents must be tested in advance by the user to determine suitability.
Properties
1.High gloss and high building up.
2.Excellent weather resistance.
Characteristic Data
(Typical values – not specifications)
|
Property |
Value |
Unit |
Test Method |
|
Appearance |
Colorless to yellowish transparent liquid |
— |
Visual |
|
NCO content |
20.5 ± 0.5 |
% |
GB/T 12009.4-2016 |
|
Viscosity |
5000 – 7000 |
mPa·s |
Brookfield LV, 63#/3 rpm,25 °C |
|
Color (APHA) |
< 80 |
— |
GB/T 1722-1992 |
|
Monomeric isocyanate |
≤ 0.1 |
% |
GB/T 18446-2009 |
|
Flash point |
~196 |
°C |
GB/T 5208 |
|
Density |
~1.17 |
g/cm³ |
GB/T 4472-2011 |
Storage & Handling
The product should be stored in dry conditions above 5°C and below 35°C with the integrity of the packaging, and prevent direct sunlight. The validity of this product is for 12 months, performance assessment is recommended before use after shelf life. The product should be protected from freezing during storage. Water dispersible polyisocyanates are very moisture-sensitive and react with water to form carbon dioxide and insoluble ureas. The generation of carbon dioxide can lead to dangerous increases in pressure. The containers must always be kept tightly closed and the access of water in all forms must be prevented. It is suggested to use up once the package is open.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Blue flash silver color powder coating | COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available GENERAL TYPES Polyester /... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof racks, grille guards, bumpers, and mirror housings, al... |
 |
Acrylic transparent powder coating | 1. Product Overview This product takes polyester resin and epoxy resin as the main base materials, integrating the excellent decorative performa... |
 |
Mica Powder MICA SG | Technical Data Generl Characteristics Specific Gravity(g/cm³)ISO 787/10-1981 2.85 Mohs Hardness DIN-EN-15771 2.5 Whiteness... |
 |
Hostaperm Yellow H4G 70-CN | Introduction Chemical Characterization:Benzimiazolone Color Index:Pigment Yellow 151 No. 13980 Material Number:297699 Test method Charac... |
Похожие товары
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
