Ethylene acrylate rubber compound
Ethylene acrylate has excellent heat and chemical resistance. It can be used within -40℃~175℃, has excellent ozone resistance, aging resistance, good compression permanent deformation, and good tolerance to oils such as automotive transmission oil and engine oil, so it is widely used in automotive accessories.
Technical parameters:
| Category | Details |
|---|---|
| Composition | –Base Polymer: Ethylene-Acrylate Ester Copolymer (AEM, e.g., Vamac®) |
| –Reinforcing Fillers: Carbon black (40–60 phr), silica (10–20 phr) | |
| –Plasticizers: Adipate esters (5–10 phr) | |
| –Curing Agents: Peroxide (DCP, 1–3 phr) or diamines (0.5–2 phr) | |
| Physical Properties | –Hardness (Shore A): 60–90 (ASTM D2240) |
| –Tensile Strength: 10–20 MPa (ASTM D412) | |
| –Elongation at Break: 200–500% (ASTM D412) | |
| –Density: 1.1–1.3 g/cm³ | |
| Thermal Resistance | –Service Temperature: -30°C to +175°C (intermittent 200°C) |
| –Thermal Stability: <8% weight loss at 175°C (24h, ASTM D573) | |
| Chemical Resistance | –Resistant To: Mineral oils, greases, engine coolants, and ozone |
| –Limitations: Strong acids, alkalis, and polar solvents (e.g., acetone) | |
| Key Applications | –Automotive: Turbocharger hoses, transmission seals, and ignition wires |
| –Industrial: High-temperature gaskets, vibration dampers, and cable jacketing | |
| –Aerospace: Fuel-resistant seals and hydraulic components | |
| Processing | –Mixing: High-shear internal mixer (70–90°C) or two-roll mill |
| –Molding: Compression/injection molding (180–200°C, 10–20 MPa) | |
| –Curing: Post-cure (180°C, 2–4h) for optimal compression set | |
| Safety & Compliance | –MSDS: Non-flammable (flash point >250°C); avoid inhalation/skin contact |
| –Regulatory: REACH, RoHS, and ISO 8067 (automotive seals) | |
| Storage | –Conditions: Dry, <25°C, away from UV/ozone; shelf life 12–18 months |
| –Packaging: Polyethylene-lined bags (prevent moisture absorption) | |
| Quality Control | –Testing: Mooney viscosity (ML 1+4. ASTM D1646), compression set (ASTM D395) |
| –Certifications: ISO 9001 (manufacturing), IATF 16949 (automotive) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Solid Acrylic Resin STD BM66 | Introduction 1. BM66 is a copolymer of methyl methacrylate and n-butyl methacrylate. It offers hard heat resistance and durability. It also offers... |
 |
Polyvinyl acetate powder coating | Brief description It is made of German and multi-head trees and chemicals such as TGIC or HAA. Features Excellent mechanical properties and exce... |
|
|
MDF (Medium Density Fiberboard) Powder Coating | Product Description This product is a powder coating suitable for medium density fiberboard substrate (MDF) coating produced by special formula an... |
 |
Low Temperature Powder Coating Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Low Temperature Curing 120°C × 20–30 ... |
 |
Powder coating for pipeline anticorrosion | Introduction The service life of the pipeline depends largely on the anti-corrosion method of the steel pipe. The use of good coating materials an... |
