EPDM rubber compound
It has excellent aging resistance such as ozone resistance, heat resistance, weather resistance, etc. It can be widely used in automotive parts, waterproof materials for construction, wire and cable sheaths, heat-resistant hoses, tapes, automotive seals and other fields.
| Category | Details |
|---|---|
| Composition | –Base Polymer: Ethylene Propylene Diene Monomer (EPDM, ENB/DCPD types) |
| –Reinforcing Fillers: Carbon black (30–60 phr), silica (10–30 phr) | |
| –Plasticizers: Paraffinic oils (10–20 phr) | |
| –Curing Agents: Sulfur/accelerators (1–3 phr) or peroxide (DCP) | |
| Physical Properties | –Hardness (Shore A): 50–85 (ASTM D2240) |
| –Tensile Strength: 7–18 MPa (ASTM D412) | |
| –Elongation at Break: 300–700% (ASTM D412) | |
| –Density: 1.1–1.3 g/cm³ | |
| Thermal Resistance | –Service Temperature: -40°C to +150°C (intermittent 175°C) |
| –Thermal Stability: <10% weight loss at 150°C (24h, ASTM D573) | |
| Chemical Resistance | –Resistant To: Ozone, UV, weathering, polar solvents, and alkalis |
| –Limitations: Hydrocarbon oils, fuels, and halogenated compounds | |
| Key Applications | –Automotive: Weatherstripping, radiator hoses, and brake components |
| –Construction: Roofing membranes, expansion joints, and sealants | |
| –Electrical: Cable insulation and surge arresters | |
| –Appliances: Gaskets and vibration dampers | |
| Processing | –Mixing: Two-roll mill (20–30 min, 50–70°C) or internal mixer |
| –Molding: Compression/injection molding (160–200°C, 5–15 MPa) | |
| –Curing: Post-cure (170°C, 2–4h) for optimal compression set | |
| Safety & Compliance | –MSDS: Non-flammable (flash point >250°C); avoid inhalation/skin contact |
| –Regulatory: REACH, RoHS, and UL 94 (flammability) | |
| Storage | –Conditions: Dry, <30°C, away from UV/ozone; shelf life 12–18 months |
| –Packaging: Polyethylene-lined bags (prevent contamination) | |
| Quality Control | –Testing: Mooney viscosity (ML 1+4. ASTM D1646), compression set (ASTM D395) |
| –Certifications: ISO 9001 (manufacturing), ASTM D2000 (standard classification) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High Temperature Curing Powder Coating | Introduction We are a professional powder coating manufacturer based in China, specializing in High Cure Powder Coating designed for demanding ind... |
 |
Radiator Powder Coating | Main Features of Radiator Powder Coating Excellent leveling properties, with high gloss and high color saturation Exceptional adhesion Good dela... |
 |
Duro Blue powder coating | Introduction No. MT-40072 Color Duro Blue Surface Fine sand texture matte System Epoxy/polyester blend Scope of appl... |
|
|
Antimicrobial and Antiviral Powder Coating | Product Introduction: This product is formulated using special resins, curing agents, and specialized antimicrobial agents. It features high react... |
|
|
Coffee Wrinkle Color Powder Coating | Introduction ProductDetails MainMaterial Pure Polyester Gloss HighLight,FlatLight,Matte,NoLight Texture Wrinkle A... |
Похожие товары
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
