Durable polyester powder coatings MT-A1000- YG001V- Red color
Product Description
MT Autobody powder coating isa series of durable polyester powder coatings designed for application onto automotive components. Ithas been designed to display excellent protective properties including corrosion, humidity, chip resistance, acid spotting and resistance to weathering over suitably pre-treated substrates.
Powder Properties
| Chemical type | TGIC-free Polyester |
| Particle size | Suitable for electrostatic spray |
| Specific gravity | 1.2 - 1.7 depending on colours |
| Storage | Dry cool conditions (below 30°C) |
| Shelf Life | 12 months |
| Stoving Schedule | 10 mins at 200°C |
Mechanical Tests
| Flexibility | (Bend Test) AS1580 402.1 | Pass 3mm |
| Adhesion | (2mm Crosshatch) AS1580 408.4 | Classification 1 maximum |
| Erichsen Cupping | BS3900-E4 | Pass > 3mm |
| Pencil Hardness | AS1580 405.1 | 1F – minimum |
| Reverse Impact | AS3715 Section 2.5.8 | Pass <=20InP |
Pre-treatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT Autobody. The pre-treatment should be used in accordance with the supplier's recommendations.
A. Aluminium: Multistage chrome chromate or chrome phosphate.
B. Galvanised Steel: Multistage zinc phosphate or chromate.
C. Steel: Grit blast to SA 2.5. 20-40µm blast profile, followed by multistage zinc or iron phosphate.
Application
MT Autobody powder coatings can be applied by manual or automatic electrostatic spray equipment. Unused or over-sprayed powder coating can be reclaimed and recycled through the coating system.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| High-Performance Powder Coatings by Resin Type | Engineered Surface Solutions for Every Application Powder coatings are formulated with different resin bases to meet diverse performance, aestheti... | |
| copper powder coating | Copper powder coating uses electrostatically charged copper-pigmented powder, often transparent or metallic, applied to surfaces and cured to creat... | |
| Weather-resistant powder coating for coils | Introduction Conventional liquid coil coatings were successfully developed and applied in the late 1950s and early 1960s. To date, almost all pre-... | |
| Hyper-durable powder coatings/non stick powder coating | Powder Properties Appearance Smooth Matt Gloss level 20 – 30 gloss units (60°) Particle size Suitable for electrostat... | |
| Hammertone Finish Powder Coatings | Hammertone powder coatings not only possess the numerous advantages of standard thermosetting powders but also feature an aesthetically pleasing pa... |
















